Hardware HotSpot issues [partly solved]

Marlonguppy · Feb 28, 2011

Hello,
I got an Linksys WRT54G v7(the 'stupid/unflashable' version), and I want to make a WiFi network with an protected (paid) access system.
I have software called "Antamedia HotSpot", and linked the Linksys with a USB-to-Ethernet adapter, and my home network (default network) connected to an PCI-card.
Unfortunately I don't get any IP address on another computers, even with ICS on and/or Antamedia DHCP.
I tried both Windows 7 and Windows XP Media Center, without luck.
Any suggestions? (link for Antamedia attached)

New post::

*bump*
So, nobody has any solution?
I did it now via Internet connection sharing (ICS, Windows 7), the internet itself works now, but it doesn't go to the hotspot login page, it goes straight to the website that I type in (NO, it isn't cache!).
So, part 1 is working. I must solve part 2, or else the puzzle breaks.

EDIT: additional info:
The computer's IP; 192.168.2.8 (internet LAN)
ICS IP (TO (not from) the router): 192.168.137.1 ; currently assigned to the hotspot software.

http://www.antamedia.com

Bunie · Feb 28, 2011

Connection without reciving an IP Address is often caused by incorrect passkey.

Marlonguppy · Mar 1, 2011

I don't have any passkey, it is open (it is a paid Internet connection(hotspot)).
You obviously didn't read.

Marlonguppy · Mar 12, 2011

*bump*
So, nobody has any solution?
I did it now via Internet connection sharing (ICS, Windows 7), the internet itself works now, but it doesn't go to the hotspot login page, it goes straight to the website that I type in (NO, it isn't cache!).
So, part 1 is working. I must solve part 2, or else the puzzle breaks.

Hardware HotSpot issues [partly solved]

Well-Known Member

#1 Princess

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum