Wii #0592 - Super Smash Bros Brawl (USA)

[FISHERMAN]

I managed to sign it and make it pal also made a dvd5 version but unfortunately i cant play it with XCM 1080 box to my samsung 206bw. I tried swithing cables video modes but in vain. any ideas?

 

[CuriousG]

[/quote]

Hilarious narration.
[/quote]

And that's why kids you don't do drugs.

 

[Lazycus]

Sorry if this is a stupid question, I've never burned a dual layer disc before. I picked up some memorx dl disc made from ritak? anyways, they are +R's. So i'm using img burn, I have a ntsc wii with wiikey 1.9g and wii updated to 3.2U.

Is there any specific setting I need to put in img burn to burn the file? I put the dl disc in and it reads it fine, then i hit burn image... and get the following error code...

"Optimum power calibration failed - reason power calibration are error"

When i hit continue again it gave me...

failed to set L0 data zone capacity

any help please.

thanks

Sounds like you need to update your DVD burner's firmware or maybe get a newer one. "L0" refers to the first layer of the double layer, "L1" is the second.

 

[spinteews]

I have a Lite-on LH-20A1L

Guess I'll try to update my firmware tonite... running vista x64...

 

[blunty]

Burned on Verbatim 8x DVD+DL (made in Singapore from Best Buy) @ 8x on nec ND-3540 with imgburn.

- no layer break
- yaosm 2.0rc3
- usa dms/d2a

SSBB (U) loaded and I played for about 30 minutes w/o issues. Upgraded wii fw to 3.2U from the internet prior to playing the game. Older yaosm fw launched the game but went back to wii channel screen.

 

[scrub6969]

Success on 2nd try!

Wiikey 1.9g
Disc: Verbatim +R DL (made in singapore)
Imgburn 2.4

Burned 2.4x, plays perfect.

First try was:
RiData +R DL
Nero 6
Got Error #001

 

[doyama]

I had success as well

Updated to 3.2U
Wiikey updated to 1.9g
Imation DVD+R DL burned at 1x speed with ImgBurn

There is a .dvd file that will set all the appropriate settings in ImgBurn for the iso. Just search the interweb for this .dvd file and it should help you burn it properly. I did 1x just to be ultra paranoid.

 

[Krumm]

Pal Wii 3.1E / Winja Deluxe
changed the update.inf with prophets one
trucha signed it
regionfri (not really needed though, for me at least)
used a TDK 8x +R DL (Book type set to -Rom)
set the layerbreake
burnt with Imgburn at autospeed, did it at 4x

Inserted the game, did the update, reboot etc.
had to change to 50Hz, had black screen with 60Hz.
got in, disabled Deflickering, got out changed to 60Hz
rebooted, when getting in it, screen goes black without
signal for a bit, something around 10s or so, game
kicks in, no skipping everything smooth.
Still didnt try SSE, everything else worked perfectly.


Had a first Burn with a 2.4x +R DL Fujifilm, didn't go too well, it locked up when trying to get the game intro, locked on a white screen, didn't have the layerbreake at the time, dunno if it actually made a difference, i believe the media did it.
Have fun, hope this helps anyone.

 

[BudFern]

So far 3 tries. The last almost worked. lol It said it was updating, but it was very fast. It didn't fix my semi-brick. I still can not get to my Wii settings. The game showed up on the "game channel", but then did not play. Unable to find disk error.

 

[henkje.doc]

Burned the game on Arita DL+r on 2,4 speed with Imgburn and the Layerbreak method. (PAL 3.1e, Wiikey 1.9g)

I already had 2 duplicate channels of Metroid Prime so no probs for me to update.

After the update i've played about half an hour. Only one disk error, but after replacing the disc again in the Wii it continued to play.

Intromovie is playing nice only end movie is playing choppy.

Its a very nice and a real Nintendo franchise game. Will keep playing this one for a while

 

[legendofninny]

ok so i hear people saying you don't need layerbreak and i hear people sayin it only works with layerbreak.

SO i'm gonna burn with verbatim dvd+R 2.4x
can anyone advise my if i should use layerbreak or not

appreciated

 

[Opium]

ok so i hear people saying you don't need layerbreak and i hear people sayin it only works with layerbreak.

SO i'm gonna burn with verbatim dvd+R 2.4x
can anyone advise my if i should use layerbreak or not

appreciated

Depends on what modchip you're using as to whether you 'need' the layerbreak set. Wiikey doesn't need the layerbreak set I don't believe. Wiinja does. If in doubt just set it anyway, can't hurt.

 

[superkris]

Just dumped the game using wiifrii.

NTSC Launch Wii
Wiikey 1.9g
3.0U (or 3.1U) not sure

Burn the game on a Verbatim DL+ at 2.4x with Imgburn (no layer break specified)

Works fine!!!

P.S. I tought the update would bring my Wii to 3.2U?!?
I only have dial-up so no way I'm downloading that

 

[Krumm]

I don´t think that setting the layer break will hurt anything. It can help you if you need it, if you don't, it won't make a difference. So i say, use it if you are not sure.

 

[ganons]

Is MASTERPIECE working for anyone?

 

[legendofninny]

ok so i hear people saying you don't need layerbreak and i hear people sayin it only works with layerbreak.

SO i'm gonna burn with verbatim dvd+R 2.4x
can anyone advise my if i should use layerbreak or not

appreciated

Depends on what modchip you're using as to whether you 'need' the layerbreak set. Wiikey doesn't need the layerbreak set I don't believe. Wiinja does. If in doubt just set it anyway, can't hurt.

even though you advised me to USE layerbreak, I did not and it works on my first try

 

[spinteews]

Works perfect. I did a FW update on my dvd burner, changed some settings in imgburn, burn at 2.4x with some ritak dl+r. My wii is a NTSC, 1.9G wiikey with FW3.2U, popped in the disc, update needed, updated, game loads, plays fine!

Thanks

 

[piatzo]

Works perfect. I did a FW update on my dvd burner, changed some settings in imgburn, burn at 2.4x with some ritak dl+r. My wii is a NTSC, 1.9G wiikey with FW3.2U, popped in the disc, update needed, updated, game loads, plays fine!

Thanks

What u changed in imgburn settings?

 

[e3m88]

primer intento:
-Wii USA 3.1U
-Super Smash Bros. Brawl USA
-burner: LG-GSA-E10N
-IMGBurn (Layer Break 2084960)
-2,4x
-Ridata (RITEK-D01-01) +R DL 2,4x
-D2Pro.
-white screen

segundo intento:
-Wii USA 3.1U
-Super Smash Bros. Brawl USA
-burner: LG-GSA-E10N
-IMGBurn (Layer Break 2084960)
-4x
-Ridata (RITEK-S04-66) +R DL 8x
-D2Pro.
-working!!!

 

[hasteveha]

I boot up from dual layder usa brawl. When I put in my retail brawl it won't work. I did a layer break on my dl, is that why?