Modded Switch and "This software closed because an error occurred" crash

[downeaster59]

There are two modded Switches in my household. One is a v1 Switch that has seven games installed on it (games I've bought from Nintendo). All games have their latest updates and are working fine. I have recently bought an OLED Switch with Picofly already installed. I have the same seven games installed on it. All updates. Last saturday, all was well. I went back a couple of hours later and TOTK started crashing as soon as I started it up, with the message "This software was closed because an error occurred". The next day, the same error appeared in BOTW, but only after it had been running for a minute or so.

I have Switch firmware 17.0.1, Hekate 6.1, Atmosphere 1.6.2, and the latest versions of all the games. I have tried updating sigpatches. I have tried uninstalling and reinstalling the two affected games. (The other games remain unaffected.) I have run the archive bit fix. othing has worked except that I discovered that TOTK 1.0 would run. Installing an update brings back the "error" message. BOTW continues to crash after a minute or so, whether I load from a save or start a new game.

I see that lots of people have had this error here and there, but I haven't found the magic formula that might work for me. I'm open to suggestions!

 

[Hayato213]

Any mod in use?

 

[downeaster59]

No mods for either game. The one thing I did that involves both games was to have the save files dumped thru JKSV. I then edited the save files with Marc Robledo's savegame editor and then restored them through JKSV. But I deleted all saves for both games when I reinstalled. Could a save game editor do this?The editor causes no problems when I play the games on Steam Deck.

 

[Hayato213]

Probably something got corrupted, generally you want a backup of your save just in case. Anyway what is your SD card format?

 

[downeaster59]

My SD card is FAT32.

 

[Hayato213]

Try to reinstall with another source, and see if that solve your problem, backup your save.

 

[downeaster59]

I've tried dumping BOTW from my other Switch and just running BOTW off the game card. It still crashes at exactly the same place.

I'm going to call it a night and try again tomorrow. If you or anyone else have other suggestions, feel free to leave them for me, but I won;t get to them till some time tomorrow. Thanks!!

Post automatically merged: Mar 6, 2024

I'll get back to this today at some point, though I have had no success so far. I wonder if I'd be better off to just wipe my microSD card and start over again, as I can't seem to locate where the corrupted file(s) or data may be, or if that's even the problem. Again, thanks for any suggestions you offer.

Post automatically merged: Mar 6, 2024

I've tried deleting and reinstalling. I've tried sigpatches (though I'm not sure if I used the right ones). Nothing has helped. I tried running BOTW off the game cartridge. I had the same error, at the same moment in the game, while running it in CFW emuMMC and CFW sysMMC. However, the game ran normally ion the vanilla stock firmware. I know, at least, the the problem is not in the game cartridge, I've booted into maintenance mode. I still haven't found the problem. When I checked BOTW for corrupt data, the system found corrupt data very quickly. I still don't know where the corrupt data is coming from.

 

[downeaster59]

I'm closer to the problem and the solution. It seems that my copy of BOTW (even though I originally bought it as a game cartridge) has corrupt data. In fact, the dump I made from my other Switch also has corrupt data. TOTK works now (no corrupt data) but the game crashes if I install the 1.2.1 update. All my other games remain fine. The copy of BOTW on my Steam Deck seems to work fine there, but if I make a copy of it and try to install it on my OLED Switch, I get errors. I'm not sure what to do next. I need a good copy of BOTW, it seems!

 

[fatherjack]

Give this a shot:
https://gbatemp.net/threads/the-software-was-closed-because-and-error-ocurred.646206/post-10333442

 

[downeaster59]

That was one of the many things I have tried. Thanks for the suggestion, but it didn't solve my problem.

 

[sith]

my guess is that your sd card or sd module in your switch is end-of-life , run it through crystaldiskmark and check random/random4k speeds, if it is under .5mbps there is a problem and you will have issues especially if you are using tinfoil as it seems to make corrupt data if it can't push it to the card fast enough.. if you have a spare 32/64gb sd, do a test by making a fresh atmo install with only basics, no tesla or edizon etc.. just vanilla atmosphere, sys-patch, the installer (fbi) and the game / nsp update you are having an issue with and do not get anything from a tinfoil shop.. if that all works slow format your sd (FAT32!) and build it back up this same way.

 

[downeaster59]

My SD card is fairly new and has been in use only about a month or so. Still, one never knows! I ran the Crystal Disk Mark test, which I have attached to this post. It seems OK.

Your comments about Tinfoil are very interesting. Since both modded Switches that I bought came with Tinfoil already installed, I assumed that this is the go-to installer. What are some good alternatives?

I have a spare 128GB card, so I can try what you suggest and see if that will work. Thanks!

Post automatically merged: Mar 7, 2024

Well, I'm still new at the modded Switch stuff. I discovered Rentry today, and saw that my sd card hadn't been set up properly. I tested my theory on a smaller, 128GB card. BOTW installed and did not crash when launched. Now I've redone my original 1 TB card by the Rentry process. BOTW is now installed and working properly on it. I'll try other games, but it looks like I have solved my problem.

 

[thesjaakspoiler]

Have you run H2TestW to see if you maybe got a fake 1TB SD card?
Those fakes are so good nowadays that you won't see the difference.

 

[impeeza]

Have you run H2TestW to see if you maybe got a fake 1TB SD card?
Those fakes are so good nowadays that you won't see the difference.

Backup all files on your SD card on your pc, format it to fat 32 using fat32 format (https://gbatemp.net/download/gui-format.33869/) then test your sd card using H2Testw (https://www.heise.de/download/product/h2testw-50539)

And let us to know the result

 

[YamiAAD]

My SD card is fairly new and has been in use only about a month or so. Still, one never knows! I ran the Crystal Disk Mark test, which I have attached to this post. It seems OK.

Your comments about Tinfoil are very interesting. Since both modded Switches that I bought came with Tinfoil already installed, I assumed that this is the go-to installer. What are some good alternatives?

I have a spare 128GB card, so I can try what you suggest and see if that will work. Thanks!

Post automatically merged: Mar 7, 2024

Well, I'm still new at the modded Switch stuff. I discovered Rentry today, and saw that my sd card hadn't been set up properly. I tested my theory on a smaller, 128GB card. BOTW installed and did not crash when launched. Now I've redone my original 1 TB card by the Rentry process. BOTW is now installed and working properly on it. I'll try other games, but it looks like I have solved my problem.

can you please tell me what is Rentry process, I have 256 GB SD Card, every thing is working fine, ZELDA TOTK on V1 it is booting normally nut whenever I update to 1.21 using tinfoil or AWWW Installer, It breaks, kindly tell me how did you fix this issue.

Post automatically merged: Apr 25, 2024

My SD card is fairly new and has been in use only about a month or so. Still, one never knows! I ran the Crystal Disk Mark test, which I have attached to this post. It seems OK.

Your comments about Tinfoil are very interesting. Since both modded Switches that I bought came with Tinfoil already installed, I assumed that this is the go-to installer. What are some good alternatives?

I have a spare 128GB card, so I can try what you suggest and see if that will work. Thanks!

Post automatically merged: Mar 7, 2024

Well, I'm still new at the modded Switch stuff. I discovered Rentry today, and saw that my sd card hadn't been set up properly. I tested my theory on a smaller, 128GB card. BOTW installed and did not crash when launched. Now I've redone my original 1 TB card by the Rentry process. BOTW is now installed and working properly on it. I'll try other games, but it looks like I have solved my problem.

can you please tell me what is Rentry process, I have 256 GB SD Card, every thing is working fine, ZELDA TOTK on V1 it is booting normally nut whenever I update to 1.21 using tinfoil or AWWW Installer, It breaks, kindly tell me how did you fix this issue.

 

[ghirahimslayer]

I've tried dumping BOTW from my other Switch and just running BOTW off the game card. It still crashes at exactly the same place.

I'm going to call it a night and try again tomorrow. If you or anyone else have other suggestions, feel free to leave them for me, but I won;t get to them till some time tomorrow. Thanks!!

Post automatically merged: Mar 6, 2024

I'll get back to this today at some point, though I have had no success so far. I wonder if I'd be better off to just wipe my microSD card and start over again, as I can't seem to locate where the corrupted file(s) or data may be, or if that's even the problem. Again, thanks for any suggestions you offer.

Post automatically merged: Mar 6, 2024

I've tried deleting and reinstalling. I've tried sigpatches (though I'm not sure if I used the right ones). Nothing has helped. I tried running BOTW off the game cartridge. I had the same error, at the same moment in the game, while running it in CFW emuMMC and CFW sysMMC. However, the game ran normally ion the vanilla stock firmware. I know, at least, the the problem is not in the game cartridge, I've booted into maintenance mode. I still haven't found the problem. When I checked BOTW for corrupt data, the system found corrupt data very quickly. I still don't know where the corrupt data is coming from.

I had a similar issue this morning. How It was caused is I had used the AIO Switch updater app to download and view some graphical cheats (Things like resolution and all that). Hadn't enabled then or anything to my knowledge. However, going through the very same app and deleting all cheat codes resolved the issue for me