Hi, I bought a PSP 1000 and I wanted to install the 6.61 update since it is outdated. But I have a problem, the PSP I bought came with a 32MB duo memory stick and I can't manage to put the update on the card since it exceeds 32MB. I tried buying a micro sd adapter with 32gb but my psp doesn't read the card. Please I need help, what can I do to make my psp read the card?
Psp 1000 doesn´t read micro SD adapter
- Thread starter Santuxcc
- Start date
- Views 1,626
- Replies 2
Hi,
Atabak Siabi is here.
Don’t Panic. You need to open your PSP. Look for dissembling psp videos on youtube as a reference guide. After dissembling, refer to that MS port. You can clearly see the pins inside that port as it has vents to see the pins. Gently push down about a millimeter each pins from the soldering side of that ports’ vent and release you tiny screw or shaft or whatever tools you can grab to loosely through those vents. It will make it better than factory. Mine ejects the MS like a tough mother giving birth after that modification.
Atabak Siabi is here.
Don’t Panic. You need to open your PSP. Look for dissembling psp videos on youtube as a reference guide. After dissembling, refer to that MS port. You can clearly see the pins inside that port as it has vents to see the pins. Gently push down about a millimeter each pins from the soldering side of that ports’ vent and release you tiny screw or shaft or whatever tools you can grab to loosely through those vents. It will make it better than factory. Mine ejects the MS like a tough mother giving birth after that modification.
Similar threads
-
K3Nv2
- T Texasauras
-
Xdqwerty
what are you looking at? - T TheSusKing
-
@
BigOnYa:
I here ya there, I have too many myself, and have hard time letting them go, since most of mine I've modded at some point. Anymore I just play Switch on the go, seriesx at home. -
-
-
-
-
-
-
-
@
BigOnYa:
I'm designing my own entertainment cabinet for my man cave, to store all my systems, then I'm also designing a power supply/HDMI switcher so I can switch to whichever system I want, and power it also. Already picked up the cabinet board, but tinkering with my drawings before start
-
@
BigOnYa:
But yea, I have frogger arcade cabinet that I gutted and put a Pi4 then Pi5 into, but it never gets played much anymore, should sell it. Even when the kids come over, they don't want to play on it, just the xbox. TMNT and Simpson's arcade is still so fun on it, esp w 2 players.
-
-
@
BigOnYa:
Can't wait to see the new "stick" that can actually play Ps3 or 360 games. I know they are getting close.
-
-
-
-
-
-
-
@
K3Nv2:
By changing the apps location https://www.croma.com/unboxed/how-to-move-android-apps-from-internal-storage-to-an-sd-card
-
-
-
-
-
-