Recent content by Eds05

  1. Eds05

    Problem with switch draining battery in sleep mode

    Hello, did u solve the issue ? I have the same issue. In sleep mode the APU is warm and the battery is drained in one day.
  2. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello Guys, Im trying to modify the payload of the picofly to make my own bin file and print my own custom icon on the switch. In the source code of Ansem-SoD the payload is located in the file payload.h There is a way to change the icon and the text to translate it ? Thanks
  3. Eds05

    Picofly in V2 shows “no sd card” but fails to boot Hekate/OFW

    Damn ! Thanks a lot dude ! After more than 30 OLED done this mistake happened to me, I never thought to check here, now I know ! 😘
  4. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Good to know ! Thank you Im gonna read it.
  5. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello guys, Sorry Im out of the topic but I throw a bottle here in case :) Im looking for a cnc milling machine or a fiber laser to do PCB reverse engineering and Im sure here I can find some specialists ! The goal is too delayer a PCB. I would like to have as a project to RE the next switch...
  6. Eds05

    Hacking Hardware OLED Picofly: sleep mode battery draining + Joycon jiggle

    They are doing little vibrations, briefly and randomly. Only in sleep mode.
  7. Eds05

    Hacking Hardware OLED Picofly: sleep mode battery draining + Joycon jiggle

    Hello Guys, I repaired another OLED switch, this time a Zelda edition, but in sleep mode the joycons are jiggling and the battery is draining like hell. What I already tried: - I swapped the MB in another oled console and its the same, - same with another joycons, - same with different modship...
  8. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thanks for helping, I fixed it. It was something ridiculous… the vcc wire on the pico was broken … I didn’t see it under the kapton tape 😂 This one is fully working now 👌🏻
  9. Eds05

    Switch OLED Black Screen with tactile working

    Please do not laugh, since the moment I removed the ic driver to try to remove the shortcut on the pin 28 the vcc wire of the picofly was broken … the issue was the hint you gave me. At least like that I did a permanent dat0 and I reconnected the vcc … ahah ridiculous
  10. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, just before that, the console was booting but the screen was not working cos the dat0 adapter shorted the 2 tests points above the emmc, so I was thinking that the oled driver ic was faulty so I removed it to try without. And since this moment the console refuse to boot. Im going to...
  11. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I have an OLED refusing to turn on. I can see no damages on the board, no shortcuts around power management ICs and the driver of the screen. The board draws : Screen connected - with battery: 0,469A - without battery : 0,033A and if I reverse the usb c connector I have between 0,005...
  12. Eds05

    Switch OLED Black Screen with tactile working

    Damn Im so upset it was that, but I touch the driver etc… Im good to buy a new one 😅 Thanks ! At least I learned something more, next time I put solder mask on these points before fixing the dat0 adapter on the emmc. 1713204905 Ok all my measurements are good on the connector now, but the...
  13. Eds05

    Switch OLED Black Screen with tactile working

    Hello Guys, Im trying to repair an OLED switch with blackscreen. - the console is fully functional docked - I change 2 times the screen connector - I swap the motherboard to try the screen (is working) - the tactile is functioning I made diodes mesurements and everything is ok exept the pin...
  14. Eds05

    Flash cart for the Switch incoming?

    Do we have informations about the price ? Cos, even if it's not a fake, it will be much better for users to pay a bit more for a chip and enjoy emulations and homebrews too. Yes it will be accessible for anyone, but too risky (ban, sw fix etc...)
  15. Eds05

    Hacking Hardware Picofly - a HWFLY switch modchip

    I tried with additional 47ohms for dat0 and cmd and I still have the same issue. I will try a layer 2 restore.
See more
General chit-chat
Help Users
    rqkaiju2 @ rqkaiju2: istg if lose another game of minesweeper