Found a replacement 82 uf 400 v for the C1 cap.
C1 apparently was the culprit on my system.
After replacing C1 and testing the standby led came on immediately.
I also replaced C3 & C20 just to be sure.
Works fine now!
Thank you.
I checked and double checked everything.
Psu is giving exactly 12v, capacitors give a reading that is exactly correct, fuse is working (multimeter beeps).
Capacitors look really clean and no bulging, and the whole psu board is clean...
Greetings gentlemen of GBAtemp.
My name is Axel, im rather new around here, and today i wanted to share my experience with the PS2 Fat power supply unit.
Disclaymer.
I will take for granted that anyone who will follow this instructions has a...
Hello,
This guide looks very helpful and I think it will help me solve my problem:
Yesterday I bought a 50004. Plugged it in to give it a test run but noticed the standby light didn't come on.
After trying some basic things and searching...
@K3Nv2 I got some cheapies at wallys, that are pretty good, already have lost a few expensive ones (one falls out and gone, can't find) while cutting grass so bought some cheap ones, and of course never lose these cheap ones. (Cheap meaning only $35, compared to air buds which I only have 1 of 2 now)