Recent content by K1ck09

  1. K

    Hardware Nintendo Switch Drawing 0.06A

    Today I re measure the PIN 5 and PIN 6: 3.25v On testpoint 3 Zone L: 3.8v My BQ is getting really hot now
  2. K

    Hardware Nintendo Switch Drawing 0.06A

    Yes
  3. K

    Hardware Nintendo Switch Drawing 0.06A

    It's around 4.5v
  4. K

    Hardware Nintendo Switch Drawing 0.06A

    Hello Guys, A few months ago I asked where in the forum about a Nintendo switch crashing in some payloads and mattygrog suggested changing the BQ24193. Today I got time and I replaced it and now it draws 0.06A and still doesn't turn on. I found some caps shorting right around the phase buck...
  5. K

    Hacking How to access your Switch's eMMC or microSD card as an USB disk on your PC

    It's possible. Ask on forum, probably, someone with more knowledge than me can help you out :D
  6. K

    Hacking How to access your Switch's eMMC or microSD card as an USB disk on your PC

    Sadly, no. Probably corrupted EMMC?
  7. K

    Hacking How to access your Switch's eMMC or microSD card as an USB disk on your PC

    Unfortunately no, I replaced BQ24193 but now it doesn't charge. I'm getting a flashing issue in that chip.
  8. K

    Hacking Question Memloader freezing

    Yeah. Thank you all for the answers but this nice guy @mattytrog is helping me out! Just found that my BQ24193 is faulty.
  9. K

    Hacking Question Memloader freezing

    Same thing happens.
  10. K

    Hacking Question Memloader freezing

    Hello, A strange thing is happening with my switch. Hekate and biskeydump payload work just fine but when I try to use the memloader, the switch just freezes... I dumped rawnand and boot0/1 using hekate, all worked fine. Restored boot0/1 with hekate, all fine. I'm using a NEW 128gb sd card and...
  11. K

    Hacking How to access your Switch's eMMC or microSD card as an USB disk on your PC

    I'm getting a similar issue...
  12. K

    Hardware Nintendo Switch Won't Turn

    Yes auto Since I couldn't get that working, I'm dumping rawnand with hekate payload, but is slow af... I'm interested in using the USB mode of memloader so I can check if is bricked or not without having to wait 2 or 3 hours...
  13. K

    Hardware Nintendo Switch Won't Turn

    On step 2, using the SD Card with the ini+boot files, what I'm suppose to choose from the menu? ums_emmc.ini or --- Go to usb command mode instead ---??? edit: selecting ums_emmc.ini stays like this: Selecting --- Go to usb command mode instead --- stays like this and the try count is always...
  14. K

    Hardware Nintendo Switch Won't Turn

    Yeah it's possible, I think, at least on memloader readme.txt file says its possible. But for some reason I don't get a new disk driver on my PC... auto "A simpler way to load coreboot/other AArch64 payloads is to use https://github.com/rajkosto/memloader and either put the files on microsd...
  15. K

    Hardware Nintendo Switch Won't Turn

    I forgot the sd card reader board that attaches to the console at my office... No other solution? auto I get this text on console: TegraRcmSmash (64bit) 1.2.1-3 by rajkosto Unknown key 'pwroffHoldTime' for BOOT section on line 12, skipping Opened USB device path...
See more
General chit-chat
Help Users
    T @ Texasauras: IS ANYONE ON TWITCH.COM TWITCH.COM/THESUSHIDRAGON