Recent content by meha

  1. meha

    Switch-OC-Suite

    latest sources doesn't support firmware patching.. remove functions related to i2c if you want to do it via firmware patching method
  2. meha

    Switch-OC-Suite

    that is correct behavior. mariko has only 3 tables available unlike erista. 204, 1331, 1600. and it is not easy task to add more tables. so 1331 is overwritten with 1600 and 1600 is overwritten with oc frequency
  3. meha

    Switch-OC-Suite

    frequency tables are parsed only one time at boot (on purpose), so you need to reboot after toggling unsafe frequencies
  4. meha

    Switch-OC-Suite

    check previous releases. i think i omitted that file in recent releases
  5. meha

    4IFIR vs. Switch OC Suite real benchmark?

    sys-clk-oc (new one) always reads correct real voltages with i2c. (both mariko/erista). old sys-clk-oc also have real voltage readings, but erista is broken.
  6. meha

    Switch-OC-Suite

    same issue is on github discussions but to summarize, arbitrary control like charging limit caused problems so was removed
  7. meha

    Switch-OC-Suite

    i asked ultrahand developer if it can be included in ultrahand. depending on his answer i will see what i can do
  8. meha

    Switch-OC-Suite

    adding it in sys-clk-oc is not that hard task. but in my opinion i don't see what it has to do with overclocking and sys-clk, which is clock selector. and not everyone uses sys-clk, so i think it should go into sys-dvr overlay or homebrew. or into ultrahand overlay makes more sense have you...
  9. meha

    Switch-OC-Suite

    2397 is only available with cpu uv. any gpu clocks above 1267 will never be included in OCS. they are above pmic limits and go ahead and use them if you want to kill your switch
  10. meha

    Switch-OC-Suite

    i can add it back in next sys-clk-oc version if this feature is a must. but since this feature is not related to overclocking, aren't there any homebrews that provide this functionality? asking sys-dvr overlay to include this option seems more logical imo 1699903358 OC Suite is not compatible...
  11. meha

    Switch-OC-Suite

    top one is target frequency and bottom one is real frequency that device is operating at. it's perfectly fine. sys-clk-oc version provides following: - real voltage readings for cpu/gpu/ram (mariko/erista) - global profile - cpu volt bug (this is caused by pcv driver bug) mitigation code, and...
  12. meha

    Switch-OC-Suite

    there are some private oc patches out there, but currently all public OC patches for switch is fork of Switch OC Suite (except for Zachy's patch which does only ram oc) you can overclock further if you use configurator to customize kip file. every needed info is in github readme and github...
  13. meha

    4IFIR vs. Switch OC Suite real benchmark?

    i already reverse engineered 4ifir kip file in back old days, which of course showed that it fakes dram clocks (so back then ST+ had 2666 or higher clocks as default, but reverse engineering it showed that it was in fact 2400Mhz with very tight timings) also Cooler once released his source...
  14. meha

    4IFIR vs. Switch OC Suite real benchmark?

    i don't care if people use 4ifir or oc-suite or whatever. i even say on github that i don't recommend using OCS. amyways there has been many proofs of 4ifir faking literally everything. so far : - fake ram clock : 4ifir fakes dram clock so it showed 200Mhz more than actual dram clock. so if it...
  15. meha

    Switch-OC-Suite

    oh yeah i forgot to make aio zip. will upload it
See more
General chit-chat
Help Users
    Bunjolio @ Bunjolio: j