I can't say it's a problem of omega de because omega de works well in real gba sp.
Probably not enough power to run omega de.
Alternatively, there is a possibility that the cartridge's pin contact is weak.
Of course, everdrive gba is better than omega de in many ways.
When you need electronic...
I have several Japanese DS lite and wanted to replace them with Korean firmware.
I also have a few Korean DS lite, but I haven't taken them apart.
On the Korean DS lite, the Italian language has been changed to Korean.
https://cdn.randommeaninglesscharacters.com/guide/ds-ique-firmware/titles_with_512.txt
First of all, thank you for the guide.
I'm preparing to do this soon.
M25PE40 has a different pin configuration.
Is there a different pcb version of the wifi board?
Or is it simply written wrong?
Yes, it's a solid way.
I was able to maintain the battery for at least a year after replacement.
If you exchange it for cr2032, it can be maintained for at least 5 years.
I suspect that the problem is with the hardware itself, as you are experiencing multiple symptoms despite all attempts.
Returning it is the best option.
If you try to fix it yourself, you'll need to inspect every chip, resistor, capacitor, and diode.
Although it's a simple structure, there are...
Fast patch engine option was sometimes causing issues in translated roms.
Try with it off. If it's the same,
Try disabling all addon options in settings and boot with addon.
If contact between cartridge and GBA is normal
It is most likely not delivering power properly.
Below is a list of possible reasons
1. electrolyte capacitors with incorrect capacity
2. weak AA batteries
3. problems with the power regulator circuit
https://github.com/Gekkio/gb-schematics/blob/main/AGS-CPU-11/schematic/AGS-CPU-11.pdf
There is a problem with the green LED or Power LED circuit.
1. Check continuity of the circuit with a multimeter tester.
2. Check components in the circuit with a multimeter tester.
To test without a...
Interestingly, as you can see in this video, the GBA SP is also affected by corrosion under the cartridge slot.
The problem is most often caused by blown fuses, missing parts, and corrosion.
Ps: Stop blowing inside the cartridges!
All GBA roms run with a white screen?
If it's not a specific rom issue, it's a hardware issue.
You also need to find out if your GBA device has enough power.
Hackroms with modified game code in the header will fail unless you manually specify the save type.
My guess is that Pokémon games use FLASH128.
FLASH128 should not be specified for all games.
Most games will work fine automatically.
Are you using firmware that supports multiple saves?
You will...
Pepsi, and it's companies, did not pull out of Russia like most did, even tho they orig said they would, so I boycott them. (Except when drunk at 2am and Taco bell is only place open.)