Recent content by Slothinger

  1. S

    Lost my micro sd card reader, anyway to mount useing rcm mode?

    Should be possible with ftpd. Should be available in the homebrew appstore. After its running you can connect from your pc with winscp or filezilla to access your files over the network.
  2. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    Had the idea to disable the wifi chip firmware wise a long time ago but i couldn't find anything to do this at that time. There must be some hardware check at boot time because my current switch had a broken card reader which also refused to boot. (stuck at switch logo) Swapping it out with...
  3. S

    Hardware Replace Switch AC Adapter cable

    Thx these testboards look nice! I ordered one and hope it ships faster than the cable. :D
  4. S

    Hardware Replace Switch AC Adapter cable

    Update: After some months of waiting i got a cheap usbc charging cable from china. Sadly the wire colors are very random: Thick Red Thick Black White Blue and a yellowish one Is there any way to test how the colors are assigned without disassembling the whole usbc plug?
  5. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    hm sadly not... i tried to bring my broken switch to an console repair shop, but they weren't able to fix it either.
  6. S

    Hardware Replace Switch AC Adapter cable

    hey guys thx for the information so far. i'll try to find a cheap usbc cable now and let you know if it worked. but i think all usbc cables on amazon are with data wires... the best solution would be another broken switch ac adapter. :D
  7. S

    Hardware Replace Switch AC Adapter cable

    Hm so the charging cable for my samsung s10e should have the right wires inside? sry I'm an electrical noob but with the power metre i got the following specs: 5V 1,5A 15V 2,6A
  8. S

    Hardware Replace Switch AC Adapter cable

    Good to know but your Aukey charger costs almost twice then the original charger :D Couldn't find much about the Nintendo charger and his usb c wires. edit: except this image from an YouTube video (Michaelblog456):
  9. S

    Hardware Replace Switch AC Adapter cable

    Hi, i got an switch ac adapter with the usbc plug cut off.(original plug wasn't included) Should it be possible to solder another cut usb c cable with plug onto it? I've heard Nintendo isn't using the usb standard here and i don't want to fry my switch when I try this charger. Picture: Would...
  10. S

    Comment by 'Slothinger' in 'I should change my mouse, any product recommendation?'

    Look at the Microsoft Intellimouse Pro and the SteelSeries Sensei which should be very close to your ms mouse. ps.: I'm using the Zowie EC1-A which is heavily inspired by the Intellimouse and i really like it.
  11. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    If there is a way to safely remove the bcm chip without a expensive air solder station i can try this.
  12. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    Really? With a faulty one it doesn't boot and with the chip removed it works?
  13. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    hey, i got this information over discord a while ago, mby someone can make use of them: This guy told me something that the chip has two firmwares, one for bt and one for wlan. The switch firmware has two modules and each module has its own fw which gets flashed on every boot. The highest...
  14. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    Nice to hear that, now i want to try that with my switch too. My problem is that i don't have an air solder / smd rework station... Maybe someone around Vienna is reading this and can help me out.
  15. S

    Hardware Debugging faulty BCM4356 / orange screen / boot loop

    Hey i think i'm in the same boat as some of you. the strange behavior of my switch was, that it was slowly dying, in the end it only booted sometimes when i left it on the shelf for some days. Currently it's disassembled because i wanted to replace the bcm with a new one from zedslab. (no air...
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    K3Nv2 @ K3Nv2: https://youtube.com/shorts/4M3E1Lz6l9E?si=fSYNJxYTa0czXVow