The mlc should erase. That's not a good error. I've never had the mlc not erase. Did you update minute to the latest version so you also have rednand options now?
You need to give more information about what you have done. And if everything went well.
Did you erase the mlc? And did it look right?
Did put the setup file on the SD card? Are you sure the titles are copied properly to the SD card...
If the console boots directly into minute the install worked.
If it's not installed you have to use recovery menu to boot into minute.
Make sure you are on the latest version of minute as stated before, and if you are booting directly into...
Try this fork of recovery menu https://github.com/jan-hofmeier/recovery_menu/releases/tag/v0.5.0-3
It should look like this: https://www.youtube.com/live/rjo4rnGd5cU?si=zGGX6zT5Acwp9sxh
Skip to about 30 mins in to see the process.
My friend, you need to use the guide: https://gbatemp.net/threads/how-to-set-up-isfshax.642258/#post-10280366
Just follow the instructions here. Read carefully please, this guide is linked in the original post explaining how to do it. It seems...
Because the mlc is replaced you probably won't see the wiiu logo, it cannot start the os since the SD card is blank. You have to use the sound of the disc drive to get into recovery menu. When you hear the second time the drive sound happens...
Which screen are you using? You need to use HDMI at this point.
If HDMI isn't working try component. The gamepad won't show minute after you install it. It will only work on the console video output.
Update to the situation: I found a way to get the system functioning again, so if anyone else is in this position here's what you can do: (requires a lot of soldering and tech experience).
Nor - Reprogramming with Teensy 2.0 ++...
Hello, I really need some help!
I got a console that was in all sorts of bad shape. Missing connector on the motherboard for the BD Drive was the first issue, I was able to replace it but I can't seem to get the OS to install, I think the...
When you defuse, don't conntect the 3V3 to the pico, it will be powered from the PC. Even defused, it won't boot into minute, because you removed one memory chip, but you should get some output in the serial terminal.
Instead of the defuse...