Evercade cartridge reader to USB

kjetil_f · Jun 26, 2023

esmith13 said:
That's my point. They aren't in vsf format. And Blaze didn't make THEc64 mini or maxi. They just licensed the game titles and likely grabbed the disk images from the internet. Cracked, trained and all.

If they were vice snapshots they wouldn't need the startup savestate files that also are on the carts, they would be combined into the image as a vsf instead of being a RetroArch savestate file.

I see. Really wished they would use unmodified disk images. But I guess that's to much to ask of them to get a Kyroflux or Greaseweazle to create true 1:1 floppy disk images.

SylverReZ · Jun 26, 2023

kjetil_f said:
I see. Really wished they would use unmodified disk images. But I guess that's to much to ask of them to get a Kyroflux or Greaseweazle to create true 1:1 floppy disk images.

I do have a Greaseweazle V4 and a Sony MPF920 drive to create compatible disks for my Amiga.

esmith13 · Jun 27, 2023

kjetil_f said:
I see. Really wished they would use unmodified disk images. But I guess that's to much to ask of them to get a Kyroflux or Greaseweazle to create true 1:1 floppy disk images.

Lololol, you're hoping for preservation-quality disk images and meanwhile, Blaze is using hacked copies of the games with trainers and cracktros. :rofl2:

SylverReZ · Nov 3, 2023

@esmith13 Ok, so to start off with making an Evercade cart reader/writer device, I could use one of these cheap $1 GL823K USB card controllers similar to the one in the 4GB Corona USB Tool or those USB 3.0 microSD card readers.

esmith13 · Nov 3, 2023

FlareReZ said:
View attachment 402629

@esmith13 Ok, so to start off with making an Evercade cart reader/writer device, I could use one of these cheap $1 GL823K USB card controllers similar to the one in the 4GB Corona USB Tool or those USB 3.0 microSD card readers.

Are you asking me or telling me?
Already sounds more complicated than it needs to be.

SylverReZ · Nov 3, 2023

esmith13 said:
Are you asking me or telling me?
Already sounds more complicated than it needs to be.

I'm telling you about ideas I have planned.

The whole scenario doesn't sound complex, its basically creating a SD to USB interface.

esmith13 · Nov 3, 2023

Ahh. You don't like my USB sd reader to GBA socket w/ super glue?? :rofl2:

Post automatically merged: Nov 3, 2023

At least it's not hot glue

SylverReZ · Nov 3, 2023

esmith13 said:
Ahh. You don't like my USB sd reader to GBA socket w/ super glue??

Post automatically merged: Nov 3, 2023

At least it's not hot glue

Looks messy, but at least it does the job lol. :rofl2:

esmith13 · Nov 3, 2023

FlareReZ said:
Looks messy, but at least it does the job lol.

the 3d printed one isn't messy at least (on the outside :rofl2:

)

seriously tho, I would love a clean and proper solution. Sign me up!

kjetil_f · Mar 14, 2024

FYI I did try to use a Retrode 2 with a Game Boy adapter, but nothing showed up except NoName.ngp with the size of 64 KB.

esmith13 · Mar 15, 2024

Hopefully it didn't damage the Evercade cart. A Game Boy cart slot provides 5v on pin1. Evercade carts being SD cards expect DAT2 on pin1 and only need 3.3v on their power pin. Both carts have a ground on the last pin. (Evercade carts actually have many pins attached to ground)

kjetil_f · Mar 16, 2024

esmith13 said:
Hopefully it didn't damage the Evercade cart. A Game Boy cart slot provides 5v on pin1. Evercade carts being SD cards expect DAT2 on pin1 and only need 3.3v on their power pin. Both carts have a ground on the last pin. (Evercade carts actually have many pins attached to ground)

I guess time will tell. I was too curious, so I took a calculated risk.

Evercade cartridge reader to USB

Member

GBATemp's Meme Lord

Well-Known Member

GBATemp's Meme Lord

Well-Known Member

GBATemp's Meme Lord

Well-Known Member

GBATemp's Meme Lord

Well-Known Member

Member

Well-Known Member

Member

Similar threads

Popular threads in this forum