Search results

  1. Ttm3

    Switch lite no wifi 2110-1118

    Switch lite no wifi gives error 2110-1118. Nothing modded. Bluetooth works fine. Hardwire networking works fine. Any ideas?
  2. Ttm3

    Hardware Fan not spinning, Joy-Cons not charging only while docked

    Forgive me if this has been resolved. I couldn't find an answer anywhere. This switch had a bad p13usb & one of the chokes below it was open. Replacing those got the unit up& running. Testing it with botw I made it about 15 min before it overheats on the dock. As soon as I remove it from the...
  3. Ttm3

    Hardware Hackable Switch with no RCM

    So I have a very early early serial switch that should definitely be hackable but it does not go into rcm at all. I even went as far as pulling the emmc & hitting power button but it just doesn't do anything. My payload loader doesn't light up & my computer doesn't see it as plugged in. I've...
  4. Ttm3

    Hardware Micro sd slow to read

    Switch works perfect other than the micro sd. When booted it does read, just very slowly. The real problem is that it does not work in RCM. I have tried multiple sd cards, replaced the sd card reader, replaced the lego connector on the board. I'm at a loss. Does anyone have a pinout or know...
  5. Ttm3

    Hardware Incorrect battery monitoring

    I have a switch that works great but the battery doesn't report correctly. It will go from 100% to 50% in about 10 min. I attempted to let it drain till it shut off & it rapidly decreased battery percentage but then sat at 1% for about an hour before shutting down. So far I've replaced the...
  6. Ttm3

    Hardware What is this Switch firmware?

    So I got a console that wouldn't start. Got it up and running but this is what loads. I think it's some sort of light test OS from the factory but I've never seen it before. Anybody familiar with this? Is this worth anything or should I attempt to load a firmware on here?
  7. Ttm3

    Hardware Another one way charging

    Received a switch that had been tampered with. Previous owner attempted to replace the charge port. Looked pretty ugly but I think most was just flux that wasn't removed. It was bsod so I hit everything with hot air just to reflow all the flux & solder. I couldn't believe it when it actually...
  8. Ttm3

    Hardware Fried multiple m92t36

    I know I read of someone else with this problem but I couldn't find the thread. Switch keeps burning the m92. I've replaced it 5 times. It only does it with a dead battery when I plug in the official Nintendo charger. If I use a slow 5 volt charger it will charge all the way up. Also if the...
  9. Ttm3

    Hacking Extract serial number

    I looked around but I couldn't find a solution that worked. Some said you can open a file in a hex editor but I couldn't get that to work. So I've got a few switches I'm attempting to repair the emmc on, but I am wondering if there is a way to extract the serial number (XAW100000000) from the...
  10. Ttm3

    Homebrew Discussion Choidujour downgrade stuck @ SYSTEM is not accessible

    Switch was stuck on Nintendo logo. goes into hekate fine, loads ubuntu fine, I decided to downgrade it and see if I could get past the Nintendo logo. I get stuck @ step 11 transferring SYSTEM. When I mount system it shows on my computer but when I attempt to access it I get an error. I'm...
  11. Ttm3

    Hardware Joy-Con Motion control

    I've got a joy-con that had a broken off R button so I soldered a new one on then ran it through the ultrasonic bath & alcohol bath like always. Now it one seems to have a problem with motion control and it won't allow me to calibrate. I'm thinking there is a problem with gyro but not sure. I...
  12. Ttm3

    Hardware Touch screen not registering

    I brought 2 motherboards back to life that both have touch screen issues. Both systems work perfectly handheld & dock mode. However neither are will register any touch at all. I've tried 2 or 3 different housings/screens & 4 different game card readers. No difference. This problem has to be...
  13. Ttm3

    Hardware Plugging in doesn't power Switch on

    Switch starts, charges, & altogether works perfect. The only thing weird is that if the switch is off and I plug it in or put it in the dock it doesn't not show a battery symbol or turn itself on. The only way to turn it on is by pressing the power button. I can verify it does charge properly...
  14. Ttm3

    Hardware Rebuild nand

    So while I'm waiting on parts for another switch I thought I'd attempt to fix this one with corrupt nand. I'm using this tutorial: https://switch.homebrew.guide/usingcfw/manualchoiupgrade.html Only thing is my keys aren't working. Biskeydump seems to get a bunch of keys but choidujour won't...
  15. Ttm3

    Hardware Dock mode only

    I've got a switch that works perfect on the dock but displays nothing on the console. The backlight is on just nothing on the lcd. I've tried it in few housings also so I know it isn't the screen. Any ideas?
  16. Ttm3

    Hardware BSOD cause

    So I've got a about 5 or 6 switches that have BSOD. 2 of them I can put pressure on the processor to avoid the blue light but with the others that doesn't work. Is there any way to test to see which component is causing the BSOD. I'd rather not reball the soc if I don't have to. Also what...
  17. Ttm3

    Hardware No battery symbol when first docked

    So I picked up a switch that wouldn't load past the nintendo logo upon inspection I noticed they ripped off the fuel gauge somehow. I replaced that with one from a donor board and now all seems to work. However it seems like the switch doesn't know when it's placed in the dock. If it is...
  18. Ttm3

    Hardware Not charging when on

    This switch starts up and works flawlessly. Except it doesn't charge. No errors, no shorts, nothing. Works great. It will maintain battery when on the dock. And it does show a charging symbol
  19. Ttm3

    Hardware Changed bq24193 now BSOD

    Switch was loading Nintendo screen then going black. Something looked off in the battery data in hekate so I changed the bq24 on a whim. Now it has bsod. Bq24 won't cause that will it?
  20. Ttm3

    Hardware Vddio Pin 18 short to ground

    So I have a short on pin 18 of the m92t36. It has about 8-9 ohms to ground. I believe it is marked Vddio. Where does this come from or go to? I removed the m92 and the cap on that circuit and the short remains. It boots to the switch screen and then gives the error 2162-0001.
General chit-chat
Help Users
    Xdqwerty @ Xdqwerty: btw bc my sup m3 is dead im gonna use its sd card to mod my dsi