Search results

  1. kylum

    Gaming PS4 FPKG Saves Work on PS5

    Easiest way to know the ID is to transfer saves to an external drive. On ps5, only ps4 saves can be transferred to external drive. The save folder name for the user is the ID. If they match then your good. If they don’t then you will have to create a new account on the ps4 and follow a guide to...
  2. kylum

    Hacking Hardware I have a question about GND location when installing hwfly.

    In Sthetix video he did not connect ground because ground is being delivered from the CPU cap that is connected with the CPU ribbon. Now whether or not that is the best ground is up for debate. However, I personally prefer to use larger awg wire for ground and power. Ground is ground and it...
  3. kylum

    Hacking Need HELP PICOFLY FILES

    good point. No but the first post has a link to a decent guide and there are tons of question already answered. Reading about how this all works will help him learn when things don’t just work. All other payloads go into the payloads folder and named so you know what they are. It is recommended...
  4. kylum

    Hacking Need HELP PICOFLY FILES

    You can use HATS pack but it’s better know what’s what honestly. Atmosphere: https://github.com/Atmosphere-NX/Atmosphere Hekate: https://github.com/CTCaer/hekate Sigpatches: https://gbatemp.net/threads/sigpatches-for-atmosphere-hekate-fss0-fusee-package3.571543/ Lockpickrcm...
  5. kylum

    Picofly AIO Thread

    You are correct! I went with what sthetix had on his video. However, you had me wondering since it’s been a while since I have done an install. My personal OLED read .428. Actually, all of my points were under .500. Will leave the high end in my post since I know for a fact I’ve seen higher...
  6. kylum

    Picofly AIO Thread

    The consensus on this is no. I’m not fully sure but I think that the longer the source and drain leads are the likely hood it will not glitch/train…. There is a reason SX and HWFLY have the mosfet so close to the APU.
  7. kylum

    Picofly AIO Thread

    I take zero credit for this formation! The below is for the OLEDs, as those are all I have installed experience with, out side of some trinkets/ unpatched installs. I do not have erista or mariko to test. Though I would assume they would be the similar. I also have not tested with an rp2040...
  8. kylum

    BOTW Cemu - Shrine and Korok Seed Map?

    Yeah, I will most likely have to use that. Was hoping to find a mod that makes it in game, that would be awesome. Guess I could try and make one but I have zero programming skills.
  9. kylum

    BOTW Cemu - Shrine and Korok Seed Map?

    Does anyone know if there is a mod like BOTW-Unexplored for CEMU??? Decided replay but on the SteamDeck. Don’t want to spend a crazy amount of time searching the land for them all and just want a an easy way to track and find everything this time around. I’ve searched the web and usual places...
  10. kylum

    Hacking Hardware Picofly - a HWFLY switch modchip

    Good point. This step is a must! Updated my post.
  11. kylum

    Hacking Hardware Picofly - a HWFLY switch modchip

    If properly installed and adequately secured this should not happen. Dat0 adapter works great! You must have pressure against the ball and adapter while securing down and is why adapters with anchors are preferred, i use tweezers to push the adapter in forward the Emmc solder ball while...
  12. kylum

    Picofly AIO Thread

    Best bet is from Ali mate. But if you can wait im sure they will start to show up in other places as well.
  13. kylum

    Picofly AIO Thread

    Multiple installs including my own and have not had any issues with the Dat0 adapters. Minus a few at the beginning that did not have solder anchors. Definitely not have had readjust once working. If it was properly installed you should not have to adjust it. Maybe go for the 4 anchor point...
  14. kylum

    Hwfly 5.0 static purple led

    Triple check your connections.
  15. kylum

    Hwfly 5.0 static purple led

    I’m assuming Hwfly-nx chip firmware was flashed? Has it ever worked or is it a fresh install? If it was flashed them static purple means it failed to glitch and you need to check your installation. Verify readings for each point would be a good start
  16. kylum

    HWFLY Oled giving device not found when attempting to flash FW via USB

    I would try another computer. My desktop refuses to flash any Hwfly chip for some reason. I think my problem might be a driver issue but it works fine with every other device. Not really sure and haven’t been able to figure it out. If I use my desktop I have to use the ST-link but requires...
  17. kylum

    Hacking Hardware Picofly - a HWFLY switch modchip

    There are multiple ways but the first things that come to mind that I’ve seen multiple people struggle with, depending on switch Version is: To much heat on components can kill them. Screen connector gets easily damaged so take caution. CLK point is super small and is a via as well. Rip trace...
  18. kylum

    Hacking Hardware Picofly - a HWFLY switch modchip

    No we do not need a new pcb for it to work. Though you will need to add in 3 caps. I’m refusing to a pcb that is designed for the switch in mind is all.
  19. kylum

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hard to really give a suggestion. There was some working on a proper pcb for picofly which honestly is the way to go if you’re willing to wait. However that may never be mass produced and waiting may be in vain. If you’re not in any rush I would wait. In the meantime I would suggest practicing...
  20. kylum

    Hardware Hall Effect sensor joycon sticks on Amazon

    For anyone interested. Since I received a refund and they did not want them back I decided to fix myself and went with what @Miranda07 suggested. Took the ones that were jumping as only two of mine had issues out of the 4 I received. Here are before and after for each part within one stick. I...
General chit-chat
Help Users
    Sonic Angel Knight @ Sonic Angel Knight: I thought it was duck season, not... king kong season....