Yeah there should be. I highly recommend placing a piece of kapton tape over the area before folding the cable. That will give the cable some extra protection
To anyone having the same issue... My issue was a broken trace in the flex cable. Actually both my flex cables have the exact same break. The cable is folded in both ends and two traces was cut in one of the folds. I soldered the traces using magnet wire under a microscope and the analog stick...
I have the exact same issue. The resistor you mention is intact however. But the left analog stick only goes in the up and down direction. Did you ever solve the issue with your board?
Yeah I don't believe it's the joycon as I have replaced it with a known working one. Same with the controller board. And I've tested with two ribbon cables giving the exact same results. I'm thinking it's the connector between the boards as well. I've placed an order for new connectors so I will...
No not that I know of
1688513299
The initial problem was a damaged charging port which I replaced and also replaced the M92 chip which was shorted. The console is working fine except for the controller issue
I have this weird issue with a switch lite. The left joycon will only go up and down. No reactions going left or right. All other buttons work as expected. I've tried replacing the joycon and also used a different controller board. Also replaced the ribbon cable between controller board and...