Search results

  1. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Não mudei a porta, no arquivo esta porta 1337 e deixei assim, só mudei o ip, ams só obtenho erro timeout (winerror10060) I didn't change the port in wupcliente, it says port 1337 which is already in the file, is this correct or could there be other ports? I only changed the console IP, I still...
  2. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    I did everything again and managed to run python to fix the sysprod, but I can't get past this step. It seems like it can't connect to the wii u, does the wii u leave it on this error screen to connect? it is already online on my wifi network.
  3. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Thanks for your answer! In the Fix section of sys_prod, I was unable to start aroma "4.Make sure the console is booting into Aroma (should be with wafel_payloader)" What should I do in this section?
  4. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Hello, I managed to proceed with everything except for the part of the mii where I always receive error 155-0206, here is my log file and print of sd files: https://drive.google.com/drive/folders/1vAd_diYS6TTeKYvo72hgTU7VehyVYfdf?usp=sharing
  5. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Anyone update for this? "Everything went fine for me, the log showed no errors at the end, but it seems like I missed something, as I can't start from aroma or the Wii U menu, I only get the black screen of the 'minutes' app, what can I do to start the aroma? thanks."
  6. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Sim, continua em minutos, devo alterar algum arquivo no cartão SD?
  7. Paulo_Suzuki

    Tutorial Region Changing the Wii U

    Everything went fine for me, the log showed no errors at the end, but it seems like I missed something, as I can't start from aroma or the Wii U menu, I only get the black screen of the 'minutes' app, what can I do to start the aroma? thanks.
  8. Paulo_Suzuki

    Hacking Homebrew [REQUEST] Monster Hunter 4 Ultimate 2x Damage Cheat

    Hello, would you know how I could change this code to always leave it activated? I ask you because in Citra I try the key combination and it doesn't work.
  9. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    Even putting 100ohm in dat0 and cmd, sometimes I got the same error, the rp2040 tiny is really complicated to deal with, but then I discovered that a thin wire in dat0 and cmd also causes this problem, I believe it affects the resistance, I also had to remove the resistors of the board and only...
  10. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    Thank you everyone for all the information! I managed to solve the problem with deeps' solution, the problem really was the lack of this 47ohm resistor, after putting an additional 47ohm in dat0 and cmd, I got a successful boot in sysmmc, thank you very much for this! I was confused at first...
  11. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    I ran this test, it informed me that the emmc is in slow mode, could this be the cause of the problem? I think it's strange that this is the reason for the problem because I can start the console normally in OFW. I'm using the picofly tiny, which already has the resistors.
  12. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    I just updated the picofly firmware again, I put ATMO 1.6.2 and the latest hekate, I changed 5 different original cards and tested in htestw (sandisk, lexar). I removed the chip to check the current system version, which is 16.0.3. Would the firmware incompatibility you are referring to be the...
  13. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    Thanks for the answers, the micro sd was tested with htestw, and I also put the clean atmosphere package, I still get the same problem. Has anyone else experienced this problem with the V1 model?
  14. Paulo_Suzuki

    Picofly in Switch V1 Erista "unknown pkg1 version hos version not supported"

    I would like to ask a question if you could help me, I have the attached problem on a switch v1 console, I just soldered a picofly but I always get this screen, I have already downloaded and copied several files, including the latest version of atmosphere, latest version hekate, I tried with cnx...
  15. Paulo_Suzuki

    Hacking Hardware Picofly - a HWFLY switch modchip

    My problem was thin wires on the CLK, after this information I managed to solve it, for the CLK it can't be thin wires!
  16. Paulo_Suzuki

    Hacking PSP-2010 won't charge, won't turn on without a battery, but charges through USB.

    Replace the capacitor that leaks on the board, it can be with a 1.5v or 3.3v battery, ideally 3.3v, for me it worked with 1.5v.
  17. Paulo_Suzuki

    Hardware PSP won't turn on only green light for 30 secs

    Replace the capacitor that leaks on the board, it can be with a 1.5v or 3.3v battery, ideally 3.3v, for me it worked with 1.5v.
  18. Paulo_Suzuki

    Psp Don't Recognize any battery, power on via AC only

    Replace the capacitor that leaks on the board, it can be with a 1.5v or 3.3v battery, ideally 3.3v, for me it worked with 1.5v.
  19. Paulo_Suzuki

    Hardware Switch become extremely lag when docked

    Has anyone found a solution to this problem? Thanks.
  20. Paulo_Suzuki

    Switch Oled black screen (after clk point short in GND), hwfly infinity training (yellow led blinking.

    Thanks for your answer! I got the same advice from sthetix, today I finished removing all cables from hwfly, but I still get a black screen (console won't turn on), when I put it on the charger there is no signal. I will provide a photo of the plate and the clk point. Have three questions...
General chit-chat
Help Users
    BigOnYa @ BigOnYa: I have bunch of pi's. I even have a 5 in my arcade cab already, (Retropie)