Search results

  1. SorataVP69

    Fusee Fatal Error: Unknown EmcDvfsTimingTableIndex: -1

    You are my savior thank you very much I had the same problem
  2. SorataVP69

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    you are my savior thank you very much!!!!!! 1707368618 It is solved, it was to change something in the configuration of hekate_ipl.ini, thanks for the response
  3. SorataVP69

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    Hello, I have this problem when trying to enter the newly created emunand. already try the following: 1-do the emunand in sdfile 2.- do the emunand in partition file 3.- update the chip firmware the sysnand enters correctly, I am on OFW 17.0.1 using atmosphere 1.6.2 files with hekate 1.0.7...
  4. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    This
  5. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    I already replaced it with a cable twice as thick, I was using 0.10mm now I'm using 0.20mm and it's the same problem, is there anything else I can try?
  6. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm going to try replacing the cable with a thicker one, I already put double-sided tape under it, it's not making contact with the metal
  7. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I have a problem with this chip, it has the latest firmware available, it turns on a couple of times and then doesn't want to turn on again until I disconnect the battery from the console for a while. I have another spare chip but I would like to know if it is possible to save this chip
  8. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    thanks, I'll be more attentive this time ❤️
  9. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Thank you, I hadn't understood, but I understand it now, you mean this resistor in the photo, I'm going to look for a replacement and I'll tell you if it works
  10. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    hello, thanks for your answer, I replaced the resistor set although it was correct, in the measurement it marked 47ohms the same as those of clk and dat0, I replaced the one that was set with 2 of 47ohms and I obtained the results that you see in the answer in my post , a bit of info on the emmc...
  11. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    hello, after the chip will work (thanks to the forum for helping me) I have problems starting sysnand, purple screen and error in hekate, do you think that placing the 2 resistors in Dat0 and CMD can solve it or just damage my Emmc permanently? before placing the chip the Emmc worked correctly...
  12. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Si the same console :(
  13. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    You are absolutely right, I just put the cpu at 15 and the RST at 26 and everything works, forgive me for making a whole post looking like a drama queen, NOW IT WORKS, THANKS AND SORRY FOR THE INCONVENIENCE
  14. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    I am using the latest firmware, in my answer is the video, here is a more complete one
  15. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I come to you once again. I bought a Zelda edition console, I proceeded to test it, everything worked fine, I took it apart and started to install picofly, once installed it gave me a clk/CMD error with fw2.67 (the colors of both errors are very similar, so I don't I knew how to identify...
  16. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    it's strange, the cable has continuity from the RST to the chip, I'm going to change the cable
  17. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    I temporarily installed another chip with the new firmware, it gives me this error, could it be an RTS error?
  18. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    dat0 gives me normal values :( I'll try in the morning with firmware 2.73
  19. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Help :(
  20. SorataVP69

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hello, I am trying to place the picofly in my oled switch, I have an error in the clk or the CMD, the leds are really very similar. The detail is that if I measure the clk with the multimeter it gives me a value of approx 600kohm and if I measure the CMD it gives me a value of approx 600kohm...
General chit-chat
Help Users
    SylverReZ @ SylverReZ: @AncientBoi, Dont forget your meds. +1