Hey fellas, hope all is well.
I recently attempted the switch lite HWfly install with no avail (that flex cable was ruined in the process) so I thought to cut losses and desolder the SP1 SP2 connector on the processor unit and remove the flex cable as well.
Unlucky for me, now the switch doesn't seem to boot at all (no sounds, no image on LCD) but the device does seem to 'turn on' as when I hit the power button with the battery plugged in the components do heat up to around 40C (104F) like it's trying to do something. Here's some pictures on the parts I touched with the soldering iron under the microscope. Does anything look wrong from these pictures? Or would anyone have any idea on where I could start the troubleshooting process? Very curious and eager to learn. Any advice is seriously appreciated.
Cheers mates, take it easy.
processor unit caps:
area above processor unit:
3.3v:
I recently attempted the switch lite HWfly install with no avail (that flex cable was ruined in the process) so I thought to cut losses and desolder the SP1 SP2 connector on the processor unit and remove the flex cable as well.
Unlucky for me, now the switch doesn't seem to boot at all (no sounds, no image on LCD) but the device does seem to 'turn on' as when I hit the power button with the battery plugged in the components do heat up to around 40C (104F) like it's trying to do something. Here's some pictures on the parts I touched with the soldering iron under the microscope. Does anything look wrong from these pictures? Or would anyone have any idea on where I could start the troubleshooting process? Very curious and eager to learn. Any advice is seriously appreciated.
Cheers mates, take it easy.
processor unit caps:
area above processor unit:
3.3v: