Hacking Yifan Lu releases usbmc (auto mounts USB) for Vita/TV

[yeshuachrist]

(https://www.sandisk.com/home/usb-flash/ultra-usb ................... I use this brand exact model in the 128gb size, I got mines from walmart, some walmarts don't carry above a 64 gig size, you can also try best buy or ebay, if you buy from ebay, make sure your use it good the first few days, so you'll know if its a clone..................psn is your friend, you don't have to but I recommend buying pool hall pro and using that to install adrenaline) (Paragon Partition Manager, software, use fat32 partition, you can use a blank keyboard space to label the drive)

 

[k3rizz3k]

Does anyone know if an SSD uses a lot more power than a flash stick? I'm curious about external enclosure with my PSTV (Again talking SSD, not mechanical)

 

[driverdis]

Does anyone know if an SSD uses a lot more power than a flash stick? I'm curious about external enclosure with my PSTV (Again talking SSD, not mechanical)

It will draw more current but it should be within what the PSTV can deliver, which is ~500mA. Some SSDs will have over 500mA listed but that is for operations like secure wiping/sanitizing the drive. I have run SSDs on the Wii U with no issue so it should work fine on the PSTV.

 

[k3rizz3k]

Sweet thank you for the reply, best a 240 gb laying around so was curious. If I already have a USB stick set up, I'd it relatively easy to transfer?

 

[driverdis]

Sweet thank you for the reply, best a 240 gb laying around so was curious. If I already have a USB stick set up, I'd it relatively easy to transfer?

Yea, you just format the SSD to ExFAT then copy all the stuff from the USB Stick over. Also, the Vita/VitaTV does not care if you rename the drive after formatting. I noticed some tutorials said to leave the name blank for some reason.

If you are on Windows, make sure you have the show hidden files and show operating system files enabled so you don't end up copying only some of the USB stick over.

 

[Deleted member 437216]

Use adrenaline easy installer and do a fresh install cause the config file needs changing

Hi, hope you can help and apologies in advance if obvious. I installed Adrenaline 6.1 on my internal memory and copied across all the files to my USB so I could run it mounted as UX0. Will installing the USB automount software break Adrenaline 6.1 when running off usb? Also will i need to move any plugins I currently have on the usb mapped to UX0?
Thanks

 

[sandog]

Is there a ver that works on 3.60

 

[retrofan_k]

Is there a ver that works on 3.60

It's always supported 3.60, since that was only version Henkaku supported at the time of the initial release.