8 BitDo SN30 Pro+ Firmware 6.01

Firmware v6.01 | download

8 BitDo SN30 Pro+ Firmware V 6.01​

Mode:​

1. The button combo to activate/deactivate the profile has changed to [L3+R3+L1+R1].
2. Optimized the dead zone range of the analog sticks in Xinput mode.
3. Optimized the vibration of the Switch mode.
4. Fixed the abnormal vibration issue in Switch mode.
5. Fixed the abnormal vibration issue when connecting to the PS Retro Receiver.

---

You can use 8Bit Updater Tool https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update-tool.38424/ or
https://gbatemp.net/download/8-bitdo-sn30-pro-firmware-update.38425/, boot tools works the same

Firmware update instruction​

1. Download the firmware file first from https://support.8bitdo.com/
2. Press and hold L1+R1+START buttons on the controller to put it on its update mode. LED on the top will blink in red.
3. Connect the controller to your Windows or macOS via the USB-C cable.
4. Click on “USB Upgrade” on your device, search for bluetooth_firmware.dat in the pop-up window and run it;
5. Un-plug the gamepad when the upgrade process is done, then restart it before using.