is that solder blob on damaged part of the cpu?View attachment 384451
I circled the CPU damage above to make sure we are taking about the same thing.
Does this look like the CPU is damaged beyond repair?
is that solder blob on damaged part of the cpu?View attachment 384451
I circled the CPU damage above to make sure we are taking about the same thing.
Does this look like the CPU is damaged beyond repair?
is that solder blob on damaged part of the cpu?
its seems the cpu is shorted bc of all the exposed copper, fix short or find someone who canNot a solder ball.
Pliers took out chunks/chips off the CPU as well as severing a trace.
I fixed trace and went from OL to 450, but the console does not turn on.
I did the rest of the install mistake free so I am pretty certain that this is where the problem lies.
Not sure if there is a fix other than trying again on a new console.
Yeah that's what I meant it looks like cooper layer in that case I would say ripView attachment 384451
I circled the CPU damage above to make sure we are taking about the same thing.
Does this look like the CPU is damaged beyond repair?
its seems the cpu is shorted bc of all the exposed copper, fix short or find someone who can
maybe not shorted sorry my bad, the traces appear to be broken on the chip pcb though
Yeah that's what I meant it looks like cooper layer in that case I would say rip
He means that the copper layers could be touching each other and therefore are shorting something that should be shorted....Not understanding what you mean.
Can this be fixed? If so how can I fix it?
What does shorted on the chip mean?
He means that the copper layers could be touching each other and therefore are shorting something that should be shorted....
Since u don't have that Much experience just call it a lose , or bring it to someone who is willing to take the time and try to fix it.
But the cost of fixing that will be prob more then the switch is worth....
short is continuity between 2 traces that are not supposed to be connected
https://www.aliexpress.com/item/100...!sea!ID!3430123615&curPageLogUid=Ex3cocXhBBiMI mod to learn, so I wouldn't mind practicing.
What is the fix involved for fixing this?
Also how did you learn reball and how hard is it? I do not like the DAT adapter as it looks cheap and would prefer to use the reball adapter.
People do really have good eyesight. I myself couldn't confirm anything from the picture. The image quality seems not enough to conclude something.View attachment 384451
I circled the CPU damage above to make sure we are taking about the same thing.
Does this look like the CPU is damaged beyond repair?
Not a solder ball.
Pliers took out chunks/chips off the CPU as well as severing a trace.
I fixed trace and went from OL to 450, but the console does not turn on.
I did the rest of the install mistake free so I am pretty certain that this is where the problem lies.
Not sure if there is a fix other than trying again on a new console.
see my previous post with attachment to see "my fix"I didn't know if you meant on the CPU chip or on the switch motherboard.
How can I fix the short?
https://www.aliexpress.com/item/1005005833149466.html?spm=a2g0o.productlist.main.5.1c5f682bLK3n8H&algo_pvid=2ca06448-b6a7-4346-908f-d022ab2917e4&algo_exp_id=2ca06448-b6a7-4346-908f-d022ab2917e4-2&pdp_npi=3@dis!IDR!149456.00!149456.0!!!70.00!!@2102111816900336146042883d0753!12000034512329298!sea!ID!3430123615&curPageLogUid=Ex3cocXhBBiM
The green adapter is a good candidate, if you want to go tou reball route.
You could avoid the great risk on destroying the clk pad on oled mod.
You might buy the 0.007mm silver cable to fix extra thin traces.
https://www.aliexpress.com/item/32961673593.html?spm=a2g0o.productlist.main.1.2806709etTa1Xe&algo_pvid=a4da8b01-8519-4fcb-b848-11a9f179e48c&algo_exp_id=a4da8b01-8519-4fcb-b848-11a9f179e48c-0&pdp_npi=3@dis!IDR!57915.00!52093.0!!!3.78!!@212249cb16900337068585653d076a!66471995606!sea!ID!3430123615&curPageLogUid=B3I4TQUrl2sl
And use transparent uv mask (jewelry uv resin) + uv laser to hardened it
https://www.aliexpress.com/item/328....order_list.order_list_main.47.25571802aZV1rr
Post automatically merged:
People do really have good eyesight. I myself couldn't confirm anything from the picture. The image quality seems not enough to conclude something.
The traces fix seems worrying on shorting with neighbour traces.
A good way to troubleshoot would actually be to install a picofly and see what error code it gives you. Then you would also no longer be considered hijacking this thread.
see my previous post with attachment to see "my fix"
there are two pcbs, the switch pcb where u performed a trace repair already, and the chip pcb where u ripped a chunk out of with ur pliers, u gota do trace repair on chip pcb if those traces have been cut/damagedI see the attachment but what procedure do I need to perform to fix it?
I understand, but how would I repair that?there are two pcbs, the switch pcb where u performed a trace repair already, and the chip pcb where u ripped a chunk out of with ur pliers, u gota do trace repair on chip pcb if those traces have been cut/damaged
it looks like chunk is bent upwards, try to bent it back to original position
ur gonna have to try to find the original traces it was connected to , so in other words ur gonna have to slowley scratch of the top layers of the apu to find the existing layersWhat do I do after that?