Hacking [RELEASE] Pasta CFW without Cubic Ninja - MSET (4.x old3ds)

[zoogie]

I'd also like to thank nop90 for releasing the source to mset pasta. Good guy.
https://github.com/nop90/PastaLaunch_MSET_4.X

 

[davhuit]

This is not absolutely true. But if you like it, continue doing it.

I aways start pressing the L key just before tapping on DS profile, thee boot rate doesn't change.

Dunno but it like never boot when I hold "L" before clicking so someone here said me to hold "L" after I click and it worked a lot better so it might be the same problem for him.

 

[Sheimi]

Dunno but it like never boot when I hold "L" before clicking so someone here said me to hold "L" after I click and it worked a lot better so it might be the same problem for him.

What is the boot rate?

 

[goldenyellowcrystal]

I tried following all the steps, but I'm stuck here.

What do? Thanks.
Apparently, after making import.db and title.db, one must go to Settings > Data Management > 3DS Software > Software and fix the "corrupted" data management files.

 

[Myth]

My flaw in doing this is I can't seem to find my ip for my 3ds, in wireless network watcher all I see under nintendo and ip is 10.0.0.172... I know this is not correct. If somone knows what I'm doing wrong it would be helpfull to know...

 

[gggggggg]

My flaw in doing this is I can't seem to find my ip for my 3ds, in wireless network watcher all I see under nintendo and ip is 10.0.0.172... I know this is not correct. If somone knows what I'm doing wrong it would be helpfull to know...

Do you have a wireless router? Try looking for the 3DS IP on it.

 

[Myth]

Do you have a wireless router? Try looking for the 3DS IP on it.

In my wireless network watch all I get is the 10.0.0.172 ip under nintendo.... Yes I am running this all wirelessly.

 

[StriderVM]

In my wireless network watch all I get is the 10.0.0.172 ip under nintendo.... Yes I am running this all wirelessly.

That is probably correct. However may I ask the IP address of your computer that is also connected to the same network?

 

[Myth]

That is probably correct. However may I ask the IP address of your computer that is also connected to the same network?

Managed to fix problem through ninjahax expolite and PBT combo, thanks though.

 

[tonybologna]

Taken from the 1st post:

A 4.5 or lower 3DS with mset already installed using Gateway's Installer file.

So, in lower this means this can also be done from 3.0.0-6.0U FW? My son's ODS3 is on older FW from 2011. Hasn't been updated since late 2011. Will this still work without updating to 4.x first?

The thread title does say 4.x so the quoted part from above does include lower than 4.5 so just want to clear this up before trying something that won't work. Thanks!

 

[innercy]

Taken from the 1st post:



So, in lower this means this can also be done from 3.0.0-6.0U FW? My son's ODS3 is on older FW from 2011. Hasn't been updated since late 2011. Will this still work without updating to 4.x first?

The thread title does say 4.x so the quoted part from above does include lower than 4.5 so just want to clear this up before trying something that won't work. Thanks!

it mean 4.x.

 

[tonybologna]

it mean 4.x.

That's not what it says in the requirements part of the 1st post that I quoted previously. It does say 4.x in the thread title though. That needs to be corrected. It could be misleading to others like it was for me.

I know most hacking,etc. takes 4.x to work with but it does say 4.5 or lower. That very well could be interpreted as lower FW's than 4.x. It should read 4.1-4.5 FW instead of saying 4.5 or lower. Just trying to get this straightened out for everybody. Thanks!

 

[CravingCritic]

According to a paste by ShinyQuagsire, GW loads their payload from 0x48000, after the old MSET/Spider ROPs. Not sure if it's of any help, but if it means what I think it does, someone could pull the code from the latest GW launcher and plop it into the Pasta MSET (with the other version specific values changed, too) at the right location and get it to boot.

 

[Vappy]

According to a paste by ShinyQuagsire, GW loads their payload from 0x48000, after the old MSET/Spider ROPs. Not sure if it's of any help, but if it means what I think it does, someone could pull the code from the latest GW launcher and plop it into the Pasta MSET (with the other version specific values changed, too) at the right location and get it to boot.

GW's launcher is pretty heavily encrypted and obfuscated, you'd have to reverse engineer it first, and of course it has the infamous brick code that triggers if you alter the launcher at all. It's far from as simple as you assume it is x:

 

[MattKimura]

Can I downgrade a 3DS to 4.2, then use the NVRam installer from the Gateway menu to be able to use the MSET exploit without any DS flashcard?

 

[tonybologna]

A 4.5 or lower 3DS with mset already installed using Gateway's Installer file.

Is the MSET profile that needs to be installed the same thing as the DS Profile Hack that needs to be installed on SD Card? If not, please point me to the MSET install tutorial on the forums. Thanks!

BTW, found a small typo error in the tutorial from the 1st post:

Now, navigate to Settings --> Other --> Profile. WHILE HOLDING THE L BUTTON, tap DS Profile. The screen should be a DARK blue on the top. As with regular CFW, the bottom screen should ideally flash white for a moment and then load the CFW. If it doesn't, hold power to reboot the system and repeat step 9. Make sure to hold L.

The 2nd bold part above(repeat step 9) should read "repeat step 8" instead. Thanks!

 

[coolfuze]

Is the MSET profile that needs to be installed the same thing as the DS Profile Hack that needs to be installed on SD Card? If not, please point me to the MSET install tutorial on the forums. Thanks!

It's the same thing.

 

[tonybologna]

It's the same thing.

Thank you!

 

[suicide-c]

Thanks for this guide my xl refused to boot using the regular palatine cfw, this boots every time for me.

 

[djalmafreestyler]

Thanks for this guide my xl refused to boot using the regular palatine cfw, this boots every time for me.

I heard somewhere that it's 99% to get success in boot rate, for me it's 100%.

I installed pasta cfw 3 times, one of them was on Old3DS and two in 3DS XL.