Hacking Acekard 2i and 3DS 4.4.07u

[XL4Y3R]

Hi guys,

my wife update my 3ds for 4.4.07 (dont know what cartridge used) and now the acekard dont work anymore, have any method for this work again?

Thanks

 

[The Real Jdbye]

Hi guys,

my wife update my 3ds for 4.4.07 (dont know what cartridge used) and now the acekard dont work anymore, have any method for this work again?

Thanks

Install Luma3DS and it should work.

 

[XL4Y3R]

Install Luma3DS and it should work.

Thank you

I dont know what is Luma3DS, but i'll search!

 

[The Real Jdbye]

Thank you

I dont know what is Luma3DS, but i'll search!

Do you have CFW now?
Follow this guide: http://3ds.guide/

 

[XL4Y3R]

Do you have CFW now?
Follow this guide: http://3ds.guide/

I have rxtools working and running on a emunand (is that u ask?)

 

[The Real Jdbye]

I have rxtools working and running on a emunand (is that u ask?)

rxTools is outdated.
Follow that guide, it will get you up to date.

 

[XL4Y3R]

In the guide says I need a DS flashcard that works, but my acekard 2i dont works anymore o.o

• DS flashcard that works on your 3DS version
• The latest release of Decrypt9WIP

Instructions

1. Create a folder named files9 on the root of your SD card if it does not already exist
2. Copy Launcher.dat and Decrypt9WIP.dat from the Decrypt9WIP .zip to the root of your SD card
3. Reinsert your SD card into your 3DS
4. Put Decrypt9.nds from the Decrypt9 .zip on your DS flashcard
5. Start your DS flashcard from your 3DS

 

[The Real Jdbye]

In the guide says I need a DS flashcard that works, but my acekard 2i dont works anymore o.o

• DS flashcard that works on your 3DS version
• The latest release of Decrypt9WIP

Instructions

1. Create a folder named files9 on the root of your SD card if it does not already exist
2. Copy Launcher.dat and Decrypt9WIP.dat from the Decrypt9WIP .zip to the root of your SD card
3. Reinsert your SD card into your 3DS
4. Put Decrypt9.nds from the Decrypt9 .zip on your DS flashcard
5. Start your DS flashcard from your 3DS

Not if you use the browser method.

 

[XL4Y3R]

Not if you use the browser method.

i'm so dumb -.-'

i'll try, thx

 

[XL4Y3R]

Not if you use the browser method.

I'm trying but its says an erro has ocorred and close browser...

I try this, but with sucess, any help?

A browser based exploit is not working
Browser based exploits (such as browserhax or 2xrsa) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps

1. Open the browser, then open the browser settings
2. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
3. Try the exploit again

 

[The Real Jdbye]

I'm trying but its says an erro has ocorred and close browser...

I try this, but with sucess, any help?

A browser based exploit is not working
Browser based exploits (such as browserhax or 2xrsa) are often unstable and crash frequently, but they can sometimes be fixed by doing the following steps

1. Open the browser, then open the browser settings
2. Scroll to the bottom and Initialize Savedata (it also may be called Clear All Save Data)
3. Try the exploit again

Keep trying. Make sure you have all the required files in the correct location on the SD card.

 

[XL4Y3R]

Keep trying. Make sure you have all the required files in the correct location on the SD card.

Works!!! I'm downloading ctrtransfer now....

Thanks ^^

 

[XL4Y3R]

Keep trying. Make sure you have all the required files in the correct location on the SD card.

Mate, after do all steps until:
https://3ds.guide/installing-arm9loaderhax
Section IV - Restoring the System


now, the acekard is working again and the system version is the same before 4.4.0-7u...

Should I continue?

Section V - Injecting FBI

Section VI - Finalizing setup



thank you

 

[The Real Jdbye]

Mate, after do all steps until:
https://3ds.guide/installing-arm9loaderhax
Section IV - Restoring the System


now, the acekard is working again and the system version is the same before 4.4.0-7u...

Should I continue?

Section V - Injecting FBI

Section VI - Finalizing setup



thank you

Yes, finish the guide. You can skip injecting FBI if you already have it.

 

[XL4Y3R]

I just tested the old method to start 3ds roms (in the system to load emunand), this not work anymore...

 

[The Real Jdbye]

I just tested the old method to start 3ds roms (in the system to load emunand), this not work anymore...

You don't need it. A9LH+Luma replaces that method.
You can move your emuNAND to sysNAND as part of the guide.

 

[XL4Y3R]

Ok, I do all steps until 2 (donwload and put the files in the sd card), should I update like step 3 says from 3ds settings?

1. Press (Start) to reboot
   • If you get a black screen, follow 9.2.0 ctrtransfer
2. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
   • Download this file and rename it to firmware.bin
   • Download this file
   • Copy firmware.bin and cetk to the /luma/ folder on your SD card
   • Delete both of these files after updating your 3DS
3. Update your 3DS by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
   • Updates while using A9LH + Luma (what you have) are safe, stop asking about it
   • The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   • If this gives you an error, set your DNS settings to “auto”
   • If this still gives you an error and your NAND is below 9.2.0, follow 9.2.0 ctrtransfer

 

[whostolemywaffle]

Install Luma3DS and it should work.

wait if i buy a r4 card for 11.3 will it work i have luma3ds and a9lh

 

[The Real Jdbye]

Ok, I do all steps until 2 (donwload and put the files in the sd card), should I update like step 3 says from 3ds settings?

1. Press (Start) to reboot
   • If you get a black screen, follow 9.2.0 ctrtransfer
2. If your backup was of a version between 3.0.0 and 4.5.0, your console will not boot until you manually download the required firmware:
   • Download this file and rename it to firmware.bin
   • Download this file
   • Copy firmware.bin and cetk to the /luma/ folder on your SD card
   • Delete both of these files after updating your 3DS
3. Update your 3DS by going to System Settings, then “Other Settings”, then going all the way to the right and using “System Update”
   • Updates while using A9LH + Luma (what you have) are safe, stop asking about it
   • The warning about never updating a New 3DS from 2.1.0 does not apply after restoring your NAND backup.
   • If this gives you an error, set your DNS settings to “auto”
   • If this still gives you an error and your NAND is below 9.2.0, follow 9.2.0 ctrtransfer

Did you move your emuNAND to sysNAND yet? If not, do that first ( https://3ds.guide/move-emunand )

wait if i buy a r4 card for 11.3 will it work i have luma3ds and a9lh

Yes. I recommend this one: http://www.nds-card.com/ProShow.asp?ProID=149

 

[XL4Y3R]

Did you move your emuNAND to sysNAND yet? If not, do that first ( https://3ds.guide/move-emunand )

Ok, i'll do now!