alecocr20's latest activity

  • A
    alecocr20 replied to the thread Hardware Instinct NX6.
    I did use the flex cable that comes with the chip. I tried debugging the issue disconnecting each point individually and I got the correct error code. Afterwards, I tried putty but it gave me again the correct values so it all pointed to the...
    • Screenshot_20240510_102644_AliExpress.jpg
  • A
    alecocr20 replied to the thread Hardware Instinct NX6.
    Hello, I had the exact same issue but mine was booting once in a while to heakte. I had to replace the chip, I went with a V6 instead of the V6S and now it's working like a charm.
  • A
    alecocr20 replied to the thread Instinct nx v6s flashing red.
    Hello, I replaced the Instinct V6S with a normal V6 and that fixed the issue I suspect and issue with the chip itself (or maybe the firmware) but now I will keep installing the V6
  • A
    alecocr20 replied to the thread Updated OFW and Hekate, Blue screen on boot to ofw.
    Hello, CFW is still working correctly. Normally blue screen is a corrupted and. Some questions: Do you have a Nand backup? How did you update OFW and how do you boot to OFW?
  • A
    alecocr20 replied to the thread Is this the correct chip?.
    The only difference is the flex cable, the orientation of the capacitors is vertical on V1 horizontal on V2
  • A
    alecocr20 reacted to Badablek's post in the thread Homebrew RELEASE MissionControl: Use controllers from other consoles natively via Bluetooth with Like Like.
    actually you just have to...click this link (taken from the official github) :grog: if discord is installed, it will open it if not, it will use your web browser
  • A
    alecocr20 replied to the thread Hacking [Soldering]What does this behaviour mean?.
    If you have a multimeter, you can test if the points are bridged and well connected. The chances of your issues being this are pretty high
  • A
    alecocr20 replied to the thread Homebrew RELEASE MissionControl: Use controllers from other consoles natively via Bluetooth.
    Hello, How do I join the discord server, do I need an invite or be friends with Ndeadly. Sorry pretty new to disccord
  • A
    alecocr20 replied to the thread Hacking [Soldering]What does this behaviour mean?.
    Hi, Pictures are needed to understand what it going on. If the console was getting hot I suppose there was a short somewhere. Try soldering the CPU flex again, use flux and small amounts of solder
  • A
    alecocr20 replied to the thread Hacking INSTINCT-NX Chip.
    I received them last week. The new order are v6 since I never had issues with those, only need careful with the grounding issues
  • A
    alecocr20 replied to the thread Hacking INSTINCT-NX Chip.
    Last v6s I received was blinking red and not glitching once in a while. I replaced it with another one and it worked correctly. Where did you get the info that info that v6s are defective? But it makes sense, I have only installed a couple of...
  • A
    alecocr20 replied to the thread Instinct nx v6s flashing red.
    I tried to debug it with putty. It glitches correctly every time I diagnose and the rest of the info seems ok. That said, it seems to work every time if I don't power on right after but wait a couple of minutes. I'll wait for to try another chip...
  • A
    alecocr20 replied to the thread Instinct nx v6s flashing red.
    Thank you for the replies It does glitch randomly and fails randomly. I bought some new ones to try a swap. In the meantime, I'll try the putty method. I suppose when is flashing red, I can get the error code? Any place I can find the putty...
  • A
    alecocr20 posted the thread Instinct nx v6s flashing red in Nintendo Switch.
    Hello, So yesterday I installed an Instinct nx v6s. It was glitching but also flashing red and going to OFW. I thought I did something wrong with the installation. Removed everything and tried with another console and I have exactly the same...
  • A
    alecocr20 reacted to OrGoN3's post in the thread Noexes Sysmodule - how to remove + what it does? with Like Like.
    Check to see if there is a noexs.kip1 on the root of your SD card. Also, check your hekate_ipl.ini for a noxes block. edit: noexes is a graphical remote debugger.
Show older items
General chit-chat
Help Users
    AncientBoi @ AncientBoi: :unsure: Walmart... Isn't that where "KARENS" hang out at?