For clarity, I'll tell you that basically the modchips all do the same thing, left, hwfly, picofly, etc etc. As far as I'm concerned, the least problematic of all is the Picofly, based on RP2040-zero
if I only put payload.bin I have the no SD screen with the missile, I have to put the boot files otherwise it won't see it. it also has latest firmware 18.0.1 and sxdc update performed.
[UPDATE]
I solved it by updating the hwfly firmware which...
Yes
it works in all its parts, including cfw, it does not read the payload.bin directly from the microSD but reads it through the boot.dat and boot.ini
Hello everyone, let me start by saying that in my career I have only worked with sx core/lite and PicoFly (rp2040-zero) so I am uninformed with hwfly. I have this OLED which is working in all its parts except that it has the annoying green LED...
duckstation is an excellent Playstation 1 emulator by Stenzek. It has a very good compabiility and it is quite performant. It also supports all kinds of enhancements such as high resolution rendering and PGXP which can lessen the "wobble" and...
Is it worth your time to investigate that lol.
If i were you, simply use the working one.
And spent my time for something more valuable.
But if you want to goes down to that road.
You said you've used the standard hekate + atmosphere, and the...
I don't think the problem is in the eMMC, probably the problem is in the installation of the modchip. The v1 with rp2040-zero, unlike all the other models, absolutely need 100ohm on dat0 and cmd, otherwise you have the problems described.
In any...
It happened to me too on 2 OLEDs. Only at startup and shutdown a green line like a flash 3/4 of the screen vertically. then everything ok.
If I removed RP2040 it didn't happen
Booting OFW from the Hekate launch menu (aka "semi-stock") is not the same as rebooting to OFW.
AFAIK the former still patches some stuff (so it won't work with 18.0.0 yet) while the latter boots to 100% stock OFW (so it can boot as a non-modded...
Have you ever tried "reboot to OFW" option from Hekate REBOOT option?
When you attempt to boot up HOS, hekate launcher uses fss0 bootloader, and "Reboot-->reboot to OFW" uses NS default bootloader.
Similar idea "NO SDCARD" page and vol_combo to...