Recent content by LuigiGad

  1. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    It happened to me on 2 OLEDs with picofly RP2040-ZERO
  2. L

    Which is the newest oled chip for nintendo switch

    For clarity, I'll tell you that basically the modchips all do the same thing, left, hwfly, picofly, etc etc. As far as I'm concerned, the least problematic of all is the Picofly, based on RP2040-zero
  3. L

    Hwfly led green Always on

    if I only put payload.bin I have the no SD screen with the missile, I have to put the boot files otherwise it won't see it. it also has latest firmware 18.0.1 and sxdc update performed. [UPDATE] I solved it by updating the hwfly firmware which was at 0.3.0 and I sent it to 0.7.2
  4. L

    Hwfly led green Always on

    Yes it works in all its parts, including cfw, it does not read the payload.bin directly from the microSD but reads it through the boot.dat and boot.ini
  5. L

    Hwfly led green Always on

    Hello everyone, let me start by saying that in my career I have only worked with sx core/lite and PicoFly (rp2040-zero) so I am uninformed with hwfly. I have this OLED which is working in all its parts except that it has the annoying green LED always on even after hekate is started. if I start...
  6. L

    Picofly AIO Thread

    Once on a Mariko I forgot to hook up the eMMC before starting it and I had === on Picofly
  7. L

    Replace emmc module with backups and prod keys

    I don't think the problem is in the eMMC, probably the problem is in the installation of the modchip. The v1 with rp2040-zero, unlike all the other models, absolutely need 100ohm on dat0 and cmd, otherwise you have the problems described. In any case, before making a diagnosis, you should...
  8. L

    Hacking Hardware Picofly - a HWFLY switch modchip

  9. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    It happened to me too on 2 OLEDs. Only at startup and shutdown a green line like a flash 3/4 of the screen vertically. then everything ok. If I removed RP2040 it didn't happen
  10. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I did some tests and asked myself a question. I have a lite switch with stock 17.0.1 and 17.0.1 emuemmc. I've updated the stock to 18.0.0. The result of course is OFW locked and emummc working at 17.0.1. If I start the payload lockpick_RCM and select "reboot OFW" why does it boot correctly...
  11. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    They have released LockPick for version 18.0.0. After starting hekate, you can make a copy of the emmc and pick up the keys with lockpick. via emmchacgen downgrade to 17.0.1 of the stock. Not changing the number of efuses burned can be done. If you want less trouble in my opinion you can do the...
  12. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I agree, but it has happened that a job went badly even after several jobs went well. there is always a chance that the work will not turn out well.
  13. L

    Hacking Hardware Picofly - a HWFLY switch modchip

    I've always thought that the ultimate solution would be to make the black part out of insulating material, keeping the U-shape
  14. L

    Cartridge Reader Repair V1/V2

    No settings applied
  15. L

    Cartridge Reader Repair V1/V2

    Hi, I have 2 cartridge readers not working, is there a tutorial to figure out what to check on the card? Then another question, is there a difference between V1 and V2 regarding the cartridge reader? I knew I didn't but from the pictures I don't think I'm sure anymore...
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    Psionic Roshambo @ Psionic Roshambo: LOL