Recent content by MichiS97

  1. MichiS97

    Homebrew [DS(i)/3DS] TWiLight Menu++ - GUI for DS(i) games, and DS(i) Menu replacement

    Aaah that explains it then. Thank you for clearing that up :)
  2. MichiS97

    Homebrew [DS(i)/3DS] TWiLight Menu++ - GUI for DS(i) games, and DS(i) Menu replacement

    Hi guys, I'm having a rather strange problem with TwilightMenu++ or rather nds-bootstrap that I can't wrap my head around and I'd like to hear your guys' input on. So, I have a DSi and a DSi XL, both running TWL++ v27.1.0 and nds-bootstrap v1.5.0 and I'm playing backups from the SD card. The...
  3. MichiS97

    Hacking Broken OLED Switch - Reuse emuMMC

    Alright so I've finally managed to mod my shiny new OLED Switch. Can you give me some pointers to how this should actually work? I have dumped and decrypted the USER Partition from my old emuMMC and tried to restore it to the new emuMMC (using my new keyfile) but it seems that this is not the...
  4. MichiS97

    What Japanese proxy service should i use to buy gameboys?

    I have had mixed expierences with both Buyee and Sendico. Buyee is very simple to handle and you don't need a prepaid wallet that you have to top up before making any bids and stuff, you just pay directly with PayPal for example. However, they are very restrictive with the items they allow you...
  5. MichiS97

    Hacking Can you please advise which modchip this is

    It's definitely a picofly chip since it uses an RP2040 board. There are no hardware versions of this mod, and we obviously can't tell you the software version flashed on the chip from the picture. The software version should be pretty much irrelevant though, as long as the chip is working. The...
  6. MichiS97

    Oldies Others Programming an Aladdin XT+ with XBlast (FT232RL Method)

    I made my own XBlast Alladin using that method a few weeks ago. So much fun and it worked right away. His video about the topic is so great
  7. MichiS97

    Hacking Broken OLED Switch - Reuse emuMMC

    Hi all, I'm extremely frustrated right now and I'm honestly just hoping someone here can help me. So I've pre-ordered a Zelda ToTK Special Edition Switch last year and installed a Hwfly basically immediately opening the package. It worked fine until, idk. winter 2023 I'd say when I started...
  8. MichiS97

    eMMC cover breaks dat0 connection

    It's still weird, though. The choice of wire shouldn't matter that much for the DAT0 point as long as you're making a good connection. Let me just verify a few things: When you remove the wire from the DAT0 adapter and measure with the black probe on a GND point and the red probe on the C point...
  9. MichiS97

    eMMC cover breaks dat0 connection

    In general I would strongly recommend not to use AWG30 wires for this mod. You might even get away with it for the DAT0 signal and the RST line, but for CLK and CMD I strongly advise against it. I can recommend these wires (AliExpress), specifically the AWG36 ones. I think these are recommended...
  10. MichiS97

    eMMC cover breaks dat0 connection

    Well do you have continuity between GND and C if you measure in continuity mode? If so then there is definitely something very wrong and that would confirm my assumption that you're shorting DAT0 to GND somehow
  11. MichiS97

    eMMC cover breaks dat0 connection

    yeah that should work, too. You can always cut the traces, too, if you have an x-acto knife or something like that
  12. MichiS97

    eMMC cover breaks dat0 connection

    Ahhhh I may have an idea. I'm sorry but can you remove the DAT0 adapter again? There are two test points below where the flex is which are connected tom GND. These test points are said to cause signal issues in some scenarios. Sthetix solves that by cutting the traces to those test points with a...
  13. MichiS97

    eMMC cover breaks dat0 connection

    I don't know if it's the picture or not but your wire looks pretty thick or at least the insulation does. What gauge is it? I'm just trying to rule out that the shield breaks through the insulation of the wire and causes a short.
  14. MichiS97

    Hardware Switch OLED witch eMMC error *=* (Change the mmc?)

    From my understanding you can boot into Hekate with just a blank eMMC. That should be enough for Hekate to create a valid partition table on the eMMC and will likely be enough to boot Atmosphere. However, there will definitely be caveats to this. If you don't ever restore a backup of the...
  15. MichiS97

    eMMC cover breaks dat0 connection

    Can you post a picture of how you're routing the wire through the eMMC shield?
See more
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: https://www.youtube.com/watch?v=47W4poKa0A4