Recent content by some1ne

  1. some1ne

    Further information about the upcoming Nintendo Switch "Mig Switch" flashcart has been revealed

    That's the megaupload guy. But yeah, ever since the first time I heard about this mig switch flashcard I immediately got Gateway3DS/Team Xecutor/Paradox/Max Louarn vibes. Now we also have this: Dude just got out of prison and is already working with these people again.
  2. some1ne

    Switch OLED. The fan is not working and joycons are not charging

    I have an OLED with similar issues. I installed an RP2040 with enamel wires and the switch would randomly turn off, and sometimes the touch screen wouldn't work. I replaced the rp2040 with the ones with custom PCBs and flex cables from china. The switch stopped turning off but now the right...
  3. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    How would that work? Do I try to restore the SLCCMPT with the boot1_slccmpt.img file and then I don't need to use the rp2040 while it's installed? 1700010788 Managed to install the NAND-AID and tried swapping the SD cards before selecting "Patch and boot IOS". Got an error about running the SD...
  4. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    The LED stays solid blue without defuse. Great, I have some spare 64gb SD cards here. The only problem is that apparently the Wii U firmware is 1.1gb and I don't think I have a 2GB card. Can I swap it for an SDHC card in the front slot after defuse has booted up?
  5. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    Oh by the way, the Wii U stuck in the factory reset screen is another one. This one we're talking about just stays stuck on a black screen.
  6. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    Luckily I already ordered some NAND-AIDs from V10lator expecting that the emmc would be dead. Can I remove the Pico after doing the linked tutorial for rebuilding the NAND on a micro SD card?
  7. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    I attached the output to this post. Showed an error about the NAND being broken.
  8. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    This one seems to have worked! Also, 4 lines in the OTP.bin file are all 0s. I have attached the logs to this post.
  9. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    Dumped it 2 more times, hash is the same. Edit: Running the extractor with SLCCMPT.RAW works.
  10. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    Yes, I used the option that mentioned PRSHhax, inside the Backup and Restore menu. When trying to run the extractor, I get this error message: PS D:\Downloads\wiiunand> .\extractor.exe .\SLC.RAW abc this is not a superclusterthis is not a superclusterthis is not a superclusterthis is not a...
  11. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    Huge thanks! That did the trick! Already dumped OTP to the SD card. What else should I follow now?
  12. some1ne

    Hacking UDPIH: USB Host Stack exploit + Recovery Menu

    I wired the pico just like your diagram using the custom code for the different pins, except for 3.3V and GND, but defuse doesn't seem to be working. I checked all pico connections with a multimeter and everything seems fine. This is what I get from the serial communication: I'm using a 1gb...
  13. some1ne

    Hacking Atmosphere-NX - Custom Firmware in development by SciresM

    I heard that prodinfo blanking by exosphere isn't working on 17.0.0, is that true?
  14. some1ne

    Hardware Components used on the Switch (mostly the motherboard and main console)

    Yeah I've been using it fine without issues, besides the fact that the right joycon won't work in handheld mode.
General chit-chat
Help Users
    Psionic Roshambo @ Psionic Roshambo: @SylverReZ, thank you, I never get to see those anti pirate things 😭 hmmm I'm a terrible pirate lol +1