Recent content by superfiege

  1. superfiege

    OLED boots straight to OFW 1/20 times

    Did anyone solve the problem?
  2. superfiege

    Have problem with mod. Using 0.02 wire for all point

    Hi there. Sorry for the question, but did you connect the mosfets to the chip? I dont see a wire leaving the mosfets... 1714339518 I recommend this mosfet-installation: https://gbatemp.net/threads/switch-oled-skhynix-with-picofly-long-boot-time.649984/post-10376185
  3. superfiege

    Hacking Hardware Picofly on "old" Samsung EMMC glitching fails sometimes

    hey thank you for your support. same as before but its not a big problem for me, but i was wondering, because its the second switch where its happening. and both are ones with an old samsung-emmc. so i thought it could have a correlation.
  4. superfiege

    Hacking Hardware Picofly on "old" Samsung EMMC glitching fails sometimes

    I dont know why you think its because of soldering...all other switch-models work like a charm. I suspect the specific switch-model. 1712776644 hey thank you. I will desolder the instinct-chip and resolder the picofly and give feedback. 1712780257 ok, I tried, but now with 2.77 its another...
  5. superfiege

    Oled mod gone wrong (cpu cap and pad missing)

    Backside install is very easy.
  6. superfiege

    Hacking Hardware Picofly on "old" Samsung EMMC glitching fails sometimes

    I dont think so, because when i swap the picofly with an instinct-nx it works fine :( But I dont like instinct-chips so I would prefer to stay with the picofly....
  7. superfiege

    Hacking Hardware Picofly on "old" Samsung EMMC glitching fails sometimes

    Am I the only one with this problem? I was wondering because it happened on two similar devices…
  8. superfiege

    Oled mod gone wrong (cpu cap and pad missing)

    I dont know if there are any problems with the missing cap but you could try to install a single-mosfet intallation on sp1 or try a alternate backside mosfet isntallation (see picofly guide).
  9. superfiege

    Picofly install gone really bad: 3.3V trace capacitors desoldered accidentally

    Im very intersted in how this can happen! Can you tell?
  10. superfiege

    Hacking Hardware Picofly on "old" Samsung EMMC glitching fails sometimes

    Hey together. I modded an old Switch OLED with Samsung EMMC. Glitching works well and fast, but sometimes (about 1 out of 15) glitching fails and gives **= (No eMMC block 1 read (should not happen)) Has anyone of you had a similar or samne problem? This setup workes fine for SkHynix and newer...
  11. superfiege

    Hacking Hardware Switch OLED Glitching Indicator LED

    Ah, I did not have time to test it right now :(
  12. superfiege

    Homebrew Can Switch Lite on Picofly chip run Android or Linux?

    I installed both of them on many picofly chiped switch lites without any problems. Did you follow the guide on switchroot correctly?
  13. superfiege

    Hacking Hardware Switch OLED SkHynix with Picofly long boot-time

    Thats right, but others said its worth trying…and i love soldering so its not wasted time. And in the end i learned a bit…even if its not improving glitch-time.
  14. superfiege

    Hacking Hardware Switch OLED SkHynix with Picofly long boot-time

    OK, so I think the main problem with my long glitching-time is in fact the apu-flex-cable. I will replace it with a single-mosfet install and give feedback.
  15. superfiege

    Hacking Hardware Switch OLED SkHynix with Picofly long boot-time

    can you tell me how long glitching needs on your oled?
See more
General chit-chat
Help Users
  • No one is chatting at the moment.
    NinStar @ NinStar: CRAZY HAMBURGER