Recent content by TheBad

  1. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is rather strange problem that I encountered two or three times. Will you try to format OFW. It worked for me when there is too much data from previous owner of the console.
  2. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is possible that when you are reflowing the emmc the LCD connector lose some connections. Check with the microscope. I find it useful to close the latch of the connector when reflowing, it tends to bend when it is opened.
  3. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    I like the idea! You could use rp2040 tiny to eliminate those giant 0805 package resistors and you could use back mosfet locations to unnecessarily opening apu shield. This way everything can be on back side of the board and as a bonus you can decrease flex cables to one piece.
  4. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    You can do it without cutting the shield if you want to, nice work btw 👍
  5. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    I am very excited to say that it works. I am using a stencil with a magnetic base. No warping or curling on the board. I have to just mention that the v-cut on panel makes the adapter little bit bigger you have to shave the edges a bit. See photos that I uploaded. I am planning to design a...
  6. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is dirt cheap this way :D 5 individual or 5 panels like this are roughly same price.
  7. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    @abal1000x They came in today, I am curious to see how will they perform. By the way these are 0.6mm thick pcbs.
  8. TheBad

    Picofly AIO Thread

    I don't think you have to but you could remove it if you want to.
  9. TheBad

    Picofly AIO Thread

    You have problem with DAT0 adapter. Reseat it even the values are in specs.
  10. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    Post a video that shows the LED.
  11. TheBad

    Picofly AIO Thread

    That cap will not affect your console, it should work properly. Touch screen problem is maybe ripped flex cable of digitizer, upload some photos. You can use only one mosfet. Check the picofly guide.
  12. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    In this case you can order the pcbs as panels. I ordered 12x9 panel and a stencil for it, with that I will reball 108 adapter at once and as they connected together there will be no bent I hope. Will see, I will let you know. By the way thank you again for sharing that working board, you save...
  13. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    I will order 0.6mm did you try to change order? Like first emmc in breakout then whole thing into the console? It may help bending issue. Maybe you could use a coin to keep it in shape?
  14. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    You are awesome thank you very much. I am done with that shitty adapter. No need to take off APU shield it will be nice...
  15. TheBad

    Hacking Hardware Picofly - a HWFLY switch modchip

    It is looking pretty good, what is the thickness of it? What material do you used?
See more
General chit-chat
Help Users
    SylverReZ @ SylverReZ: @BigOnYa, And you too :) +1