Oled Volume Resistor

MiguelDiaz · Apr 30, 2024

Hello guys!, new to the forum.

I was cleaning and fixing the Dat0 on my Switch oled and my screwdriver slip and I think I rip a capacitor marked on the image.

I tried measuring them using the multimeter with continuity to check what voltage should be, but I'm not sure how should I measure the other ones to check the compatible resistor I should get.

I have some donor boards from PS5 Dualsense, not sure if I can pull off a Resistor from there.

Thanks in advance

MiguelDiaz · May 1, 2024

up

Post automatically merged: May 1, 2024

up

Hassal · May 1, 2024

That's not cap its a ferrite bead
According the diagram its measured 12nH
The cap above it is 70pF

jkyoho · May 1, 2024

doubt that's an inductor but not resistor. Based from OG and lite design, there are always 100~150 ohm resistor on buttons

Hassal · May 1, 2024

I provided the components as per the diagram, I doubt someone will go through the trouble to throw off people. Up to op if they want to follow it.

Post automatically merged: May 1, 2024

jkyoho said:
doubt that's an inductor but not resistor. Based from OG and lite design, there are always 100~150 ohm resistor on buttons

I stand corrected its indeed a 150 Ohm resistor.

Oled Volume Resistor

New Member

New Member

Well-Known Member

Well-Known Member

Well-Known Member

Similar threads

Popular threads in this forum