Search results

  1. S

    Steam Deck hardware repair

    yes I have doubled checked it. I tried to look near the slot where I replaced and didn't find any short at all. seems like there is only 1FPC that connects to the controllers. i tested with a know working board and controls as well as FPC are good. so i am guessing the fault to lie somewhere in...
  2. S

    Steam Deck hardware repair

    hi i have replaced the sd card slot, couldn't find the actual part but i replaced using NS SWITCH card slot and is working fine. but all the controls are no longer working.
  3. S

    Steam Deck hardware repair

    hi, I don't know if this the proper area where i should start a thread. Anyway i noticed that there is no steam hardware repair thread anywhere online. i have a steam deck with a broken sd card slot. i couldn't find any replacement sd card slot and noticed that the sd card slot of NS switch...
  4. S

    Hardware TV mode and USB is not working after P13USB replacement

    hi, im having similar issue with the switch that i am working on. charge port messed up after changing. unit will not turn on. found some short and replaced the p13usb chip, after which was able to turn on. tested the dock and no hdmi output. i did continuity test on first filter and it has no...
  5. S

    Hardware M92T36 or BQ24193

    hi its been a while. i hi its been a while, i have shelve my switch for the longest time. i have replaced the missing capacitor that i manage to knock off. the unit still wont dock. (no hdmi output) the unit will charge with either direction of the charger. a little re fresher this unit had...
  6. S

    Hardware M92T36 or BQ24193

    the size seems to be correct. i have already bought them. now i am waiting for a couple of usb type c male plugs and will try to make a test board to check the integrity of the solder.
  7. S

    Hardware M92T36 or BQ24193

    ok so i was able to talk to a local electronic supplier. all they have is 0.1uf 0603 16v ? will this work ?
  8. S

    Hardware M92T36 or BQ24193

    .1uf 0603 how many volts ? 25v good enough ? i am having a hard time looking for it here in our country
  9. S

    Hardware M92T36 or BQ24193

    i knocked off the capacitor after testing the dock, while doing continuity. so i guess it has nothing to do with my switch refusing to dock. so where can i get one of those capacitors and what is the size ? also what else could i check, was also wondering if it could be the charge port? since...
  10. S

    Hardware M92T36 or BQ24193

    So i the part finally arrived and was able to change the choke coil. Problem is dock still doesn't work. Also i manage to detach a small capacitor like smd part while using a dmm checking for continuity its near one of the choke chokes it look like a ceramic super tiny, anybody know where i can...
  11. S

    Hardware M92T36 or BQ24193

    thanks il try to buy this and replace the filter
  12. S

    Hardware M92T36 or BQ24193

    i could not attach any link to the image since i am just a new member. so i just grab a photo from another thread. the part that i need is the 5th choke when looking at this photo the one that has 6 legs. near the charge port its connected to the p13usb chip
  13. S

    Hardware M92T36 or BQ24193

    mine has no continuity at all. the other filters i measured it has resistance of around 1.5 to 1.6 the one in question is just O.L. on my multimeter. i was thinking of just putting a jumper to this, but when something goes wrong it will fry my P13USB chip once more and might cause a lot more...
  14. S

    Hardware M92T36 or BQ24193

    i have checked the coils. seems like the first one doesn't have any continuity at all. where can i get one of these? does anyone know the value of the choke ?
  15. S

    Hardware M92T36 or BQ24193

    hi guys i finally tested my switch with a doc and it does not output anything to the screen. so a little recap i change the usb charge port and the p13usb ic. what do i need to check now ? is there anyway to check if there its the usb charge port or the p13usb ic?
  16. S

    Hardware M92T36 or BQ24193

    I don't have a dock, il try to borrow one and test it out. I will update soon as i tested it.:) Was i correct on how to check continuity with the common chokes?
  17. S

    Hardware M92T36 or BQ24193

    Sorry for the late reply been kinda busy these days. Hmmm let me see if i understand this correctly. So all same number chokes should have continuity, and they are not suppose to have continuity to other chokes with different numbers (e.g.choke 1 continuity to choke 1). Pintglass was wondering...
  18. S

    Hardware M92T36 or BQ24193

    hmmm how do i test that ? do i need to test all those points ? continuity against ground ?
  19. S

    Hardware M92T36 or BQ24193

    I haven't tested the dock mode. what are "common mode chokes" can you please send photos. Was just really happy to see the unit finally turn on. after struggling to replace the charge port twice thinking it wasn't soldered properly. then figured maybe something else was wrong. till i found...
  20. S

    Hardware M92T36 or BQ24193

    auto you are right this is the faulty part, after removing this part i tested for short and it was gone. So i replaced with a new one and unit booted right up. thank you very much
General chit-chat
Help Users
  • BakerMan
    I rather enjoy a life of taking it easy. I haven't reached that life yet though.
    SylverReZ @ SylverReZ: @BakerMan, If it's so shitty, why don't you clean it up. :tpi: