If ya want to exit kiosk mode i do think you just need this: https://switch.homebrew.guide/usingcfw/manualchoiupgrade.html
Or in the better case you just need to launch cfw.
Or if you have v2,lite or oled, install a picofly in it.
If it's just about pirating games.
This would be safer for new switches than a modchip.
But the game changing method is not very good, it's gonna kill the cartridge slot sooner or later.
So a small button on the top of the cartridge would be better.
Hi guys!
Do anyone have the same problem as myself?
Etahen crashes nearly everytime when i close a game.
It would be good to know if it creates a crashreport somewhere, and then send it to LightningMods on github in the issues.
What contact cleaner do you recommend?
And rma-223 flux would be good?
It done the sh*t again so i removed the dat0 adapter and it turns on fine now.
What adapter do you recommend?
This chinese something with a plus 3v3 point is sh*t as fck.
Or i just find someone to do a reball with a solder...
Nope i'm not installed anything beside the dat0 adapter.
I think the problem was some flux stayed on the board or under the emmc chip.
About the fan:
I was in the supermarket to buy some food and they kicked in the door and stole my fan that was on the table, plus the fcker stole my electric...
Update:
I fixed it right now fast.
I cleaned the emmc and other contacts with isopropyl alcohol again and then dried it out with my hot air gun i use for phone screen removing.
Hi guys!
I have a problem with my oled console.
After placing the dat0 adapter i tried to boot it to ofw but my switch just won't turn on.
I don't know if it's because of the dat0 adapter or because the fan is missing, some fckface stole my fan, so i decided to mod my switch while the new fan...
interesting.
i only get this error with the zelda tears of the kingdom with updates.
the base game without updates works well, but if i install no matter what the version of the update, the game starts with this error.
Here's my answer, i done today my lil bro v2.
And it's my first install.
There was a little problem with the d0 and mosfet.
The cpu clamp is touched these cables that was the problem.
Don't place cables under the cpu heatsink clamp because it's very sensitive to force and you can get d0 error...
The guy have a unpatched one.
It is a little bit pricier but he can buy a type c payload injector, that is the most easiest and safest method for unpatched v1 to inject payload without pc or phone.
Why suffer with the soldering when there are this method.
One favor the priest, one favor the...
Maaan.
This is disgusting.
Even i do it much nicer than this with my crap chinese aliexpress soldering iron.
I only do the mosfet differently because somehow i'm not able to bridge the gnd point together, i use a cable that i fold like that i can solder to the gnd points of the 2mosfet together...
thanks.
so it's not like it's gonna kill the switch or anything?
i have a other two that have missing caps near the type c connector and don't have one by default, that caps needed or it's just for the type c connection?
i'm going to rape 2 switch for my little brothers so in the worst case i...
Hi!
I accidentally removed and lost these two caps right now on a zero. (i marked it with yellow.)
what cap is these two?
i need to replace them or i can just leave it be and gonna work like this?