Search results

  1. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    I'm sure you created a short circuit during the trial and error process of your installation. There are more than 30 installations in Oled versions that I only use single-sided installation and always with kamikaze mod. This way you reduce the chance of damaging something on the console by half...
  2. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Good news everybody, Atmosphere and Hekate have both been updated for FW 18 https://github.com/CTCaer/hekate/releases https://github.com/Atmosphere-NX/Atmosphere/releases
  3. Viktorsilva

    Nintendo Switch firmware 18.0.0 has been released

    i´ve searched all around and cant find any Athmosphere 17 (supporting FW18) . any tip where to find?
  4. Viktorsilva

    Nintendo Switch firmware 18.0.0 has been released

    so, you are saying that it will work even if the emunand is on FW18 ?
  5. Viktorsilva

    Nintendo Switch firmware 18.0.0 has been released

    Right! But in FW18 without any Emunand ou nand Backup can you rebuild a nand with lockpick ?
  6. Viktorsilva

    Nintendo Switch firmware 18.0.0 has been released

    And how do you get switch keys on fw18 ?
  7. Viktorsilva

    Nintendo Switch firmware 18.0.0 has been released

    But you had a nand backup of an older version of firmware, right ? 1711572087 with older nand backup ?
  8. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    I stopped using that 3.3v point on v1&v2 because it is very fragile. Just go for the 3.3v on nand. it´s a double pad to solder in.Mutch easier and solid work. 1709853459 congratulations, wonderfull work :)
  9. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    yes, i agree. 750 pages with precious information where you can learn from the mistakes and failures of other users and prevent the same mistakes
  10. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Your own Picofly look even better then the original :) . If Philippines werent so far away from Portugal, i would certainly be your customer. Great Work :)
  11. Viktorsilva

    How to practice kamikaze.

    hey guysIt's funny that I also thought of this idea that I used in the xbox kamikaze days and made a mold with old X-Ray where I made a hole in the exact place where the DAT0 was drilled. I don't see much logic in drilling the hole in the bottom layer. It's much more risky and difficult. Not to...
  12. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    great job ! it looks very clean :)
  13. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    I have never installed one of these but there are several users on these forums who use this model and say it works very well. I leave the pinout here:
  14. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    hey guys. Looking at this installation, I wonder if: - if any point-to-point continuity test was carried out (very important to determine whether the magnet wire was stripped at the connection points) -What is the console model? - Was the removal of the CPU flex done well? -Are these points...
  15. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Here are some examples of the installation I did today on a customer's OLED switch. I always follow the same basic electronics principles in a fusion of knowledge acquired in this forum on the best tips for a successful installation.Said that, lets begin : I always start by removing the...
  16. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    This is way i chosse Kamikaze and avoid to increasing the risk of thermal Stress doing Reflows 1708523300 This issue has already been mentioned several times. No, you don't need to use 2 Mosfets! No, it is not necessary to have 2 wires to drain, 1 is enough. This is a real image from one of...
  17. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Howwww, that was a great tip from @Hassal :hrth::hrth::hrth: 1708454606 Did you try to swap Mosfet from under side to cpu capacitor ?it must have to be with something related to capacitor :(
  18. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Allways use thicker wire for ground and vcc. its a common rule in electric circuits.
  19. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    There are several details that need to be corrected. What happens to these flux residues around the welding points? why don't you clean the motherboard with ipa? Did you know that some flux's are energy conductors and can create interference in the operation of the console ? Not to mention...
  20. Viktorsilva

    Hacking Hardware Picofly - a HWFLY switch modchip

    Hi. i bought: https://pt.aliexpress.com/item/32697729029.html?spm=a2g0o.order_list.order_list_main.20.3372caa4dgvbPu&gatewayAdapt=glo2bra 1708377825 Did you install it with point-to-point welded wire or with flex? If it was with flex, I recommend that you remove the flex and solder each...
General chit-chat
Help Users
  • No one is chatting at the moment.
    NinStar @ NinStar: CRAZY HAMBURGER