Search results

  1. Jeik

    B point issue after modding Switch OLED

    Sorry for disappearing, I got extremely bummed out after trying several times afterwards and failing. I didn't manage to make it work and instead ordered a new tablet and will just use everything from the old one (except the mobo...and maybe the daughterboard if it still breaks touch after...
  2. Jeik

    B point issue after modding Switch OLED

    I somehow managed to solder it back and it gives values like before, but the device still won't boot, even with the flex cable removed and the chip removed. The thing is that I avoided high temps on it, it came off while I was desoldering with 250 degrees C (and while soldering the max I went...
  3. Jeik

    B point issue after modding Switch OLED

    I tried as much as possible, but the resistance never reached 13 ohms (2-3 at best). I decided to remove the flex cable and the SP1 capacitor (0201 1UF 6.3V X5R apparently) fell off. Not sure what to do about it (since I don't have such a capacitor at hand along with a heat gun). Maybe I'll try...
  4. Jeik

    B point issue after modding Switch OLED

    By CPU you mean the capacitors the APU flex cable is soldered to? I'll test asap and get back to you.
  5. Jeik

    B point issue after modding Switch OLED

    It doesn't beep while prodding B nor does it beep if I prod the bottom part of the capacitor next to the B point (it beeps e.g. with the yellow, bigger capacitor on the right though).
  6. Jeik

    B point issue after modding Switch OLED

    I tried a continuity test with one prod on the bottom part of the capacitor and another on the B point and it beeps (so I guess it's shorted). I also thought to myself "well, it won't beep but other connections are proper, maybe it will work once I reassemble the console" but the Switch won't...
  7. Jeik

    B point issue after modding Switch OLED

    Hi everyone, I had decided to install the Instinct NX on my OLED Switch and I managed to connect all points besides B properly and now the Switch is unresponsive (won't boot). For some extra context, I went with the "no reflow" approach to the flex cable meant for the EMMC chip. The...
General chit-chat
Help Users
    AncientBoi @ AncientBoi: :unsure: Walmart... Isn't that where "KARENS" hang out at?