Accidentaly updated my cfw switch to 17.0

[BaamAlex]

So instead use the fuse.bin payload I have to use heckate, and press - button?

Of course when you want to boot into the hekate bootloader.

 

[Tackskull]

Check your fuse count, it probably would say 19, unless you have a v1 unpatched unit on autoRCM, if you downgrade you probably won't be able to boot due to mismatch fuse count.

I am in hekate menu, on console info where do I find the fuse count?

Post automatically merged: Oct 20, 2023

Load up Hekate go to Console info, HW and Fuses.

I am on HW e Fuses, but I don't know where is the fuse count. Is that maybe "burnt Fuses"? I have Burnt Fuses ODM 7/6. I don't see any other Fuse related number

 

[Hayato213]

I am on HW e Fuses, but I don't know where is the fuse count. Is that maybe "burnt Fuses"? I have Burnt Fuses ODM 7/6. I don't see any other Fuse related number

Right next to it, it has a number and that number point to a firmware with your fuse count, like 19 for 17.0.0

 

[Tackskull]

Right next to it, it has a number and that number point to a firmware with your fuse count, like 19 for 17.0.0

I just take a photo, so you can tell me please?

 

[Hayato213]

I just take a photo, so you can tell me please?

Fuse count is 12

 

[Tackskull]

Fuse count is 12

So with a 12 can I downgrade the firmware?

 

[Hayato213]

So with a 12 can I downgrade the firmware?

You got any nand backup of previous firmware?

 

[Tackskull]

You got any nand backup of previous firmware?

No

 

[Hayato213]

No

What you can do is make a backup of current boot0/boot1 and raw nand, then flash firmware 16.1.0 with daybreak, you can get it from Darthsternie for firmware

 

[Tackskull]

What you can do is make a backup of current boot0/boot1 and raw nand, then flash firmware 16.1.0 with daybreak, you can get it from Darthsternie for firmware

I already have the firmware 16.1.0 on a folder in the SD, so how can I make a backup of current boto0/boot1?

 

[Hayato213]

I already have the firmware 16.1.0 on a folder in the SD, so how can I make a backup of current boto0/boot1?

Use Hekate to make your nand backup, you need about 30gb of space for boot0/boot1 and raw nand.

 

[Tackskull]

Use Hekate to make your nand backup, you need about 30gb of space for boot0/boot1 and raw nand.

I think I'll wait the atmosphere 17.0 I am too scared to do this things

 

[BaamAlex]

I think I'll wait the atmosphere 17.0 I am too scared to do this things

Atmosphère already works on 17.0.0

 

[Tackskull]

Atmosphère already works on 17.0.0

So why games won't run anymore?

EDIT: in reality olny some games don't run anymore, other run well..... I don't get it? For those games whitch don't works anymore, it says "data corrupted"

 

[Hayato213]

So why games won't run anymore?

It is the patches.

 

[linuxares]

So why games won't run anymore?

EDIT: in reality olny some games don't run anymore, other run well..... I don't get it? For those games whitch don't works anymore, it says "data corrupted"

Signature patches aren't fully working 100% yet.

 

[Tackskull]

Signature patches aren't fully working 100% yet.

In fact even tinfoill doesn't works anymore, there is another way to install games from hard disk?

 

[linuxares]

In fact even tinfoill doesn't works anymore, there is another way to install games from hard disk?

DBI, TinWoo I think works.

 

[Evilander]

Yeah - I still do this stupid stuff too. Did the same thing last night. No installs are working through tinwoo, erroring out right from the beginning and no previous games are working.

Everyone updating their sigpatches through the sigpatch updater nro?

 

[linuxares]

Yeah - I still do this stupid stuff too. Did the same thing last night. No installs are working through tinwoo, erroring out right from the beginning and no previous games are working.

Everyone updating their sigpatches through the sigpatch updater nro?

No, since no 17 patches been release in a clump yet.