Hacking Question Blue Screen Switch V2 (mariko)

[mjd515]

hey everyone, i have an issue and i havent had the best success finding out if i have a road ahead to fix it. i opened my switch in prep to install the HWFLY chips but the seller sent the wrong chip, i think i bent my emmc chip when i took it out and now my switch wont boot and only shows a blue screen. is there anything i can do to fix this? i know the emmc is linked the the hardware and you cant just buy a new chip to replace it. i also dont have a backup of the nand seeing as it is a V2 switch and i havent installed the mod chip yet. i have a launch day switch with atmosphere on it as well so i could use that one to do some fixing if possible but i dont know what my options are at this point. any help would be amazing. i honestly just want to get the switch back to stock if possible. ive also seen maybe a possibility of android but im unclear if thats only a with V1 with access to RCM or a V2 with modchip.

EDIT- Also MODS if this is in the wrong section please move to the appropriate section i figured it would be in the right place here but i am unsure

EDIT 2- i have reached out to the seller of the HWFLY and they sent me the switch lite chips so once i get the correct ones will i have any hope of getting the switch up and running? i am thinking that if i install the modchip i can disregard the emmc and do emummc? or if thats not possible at least id have a way to bypass something using the mod chip?

 

[thesjaakspoiler]

Try to apply some gently pressure to the emmc chip.
Chips usually don't break, the contacts just detach from the board.
If this doesn't solve your blue screen, you might have broken something else and I would get the Lite fixed first.