Hi! After entering PIN I get the following screen(in attachment)
Though usning nxlink everything goes fine
Have no SaltyNX installed
Update: found a solution
The problem was that I was trying to connect PS4 outside my local network using domain instead of using direct address. Though Chiaki for other platforms can work with domains.
FYI: princessvini 's issue has been solved in private messagesstill dosen't work :/
Hello sorry for the late reply.
What do you mean by network domains ?
Are you running the switch from a different network subnets ?
--------------------- MERGED ---------------------------
FYI: princessvini 's issue has been solved in private messages
I started the dev form 9.2.0, but now I m running on 10.0.2.which version of HOS are you using? Because im on 9.2.0 with OC and i have the same image issues and is not my wifi tnx
I think the ps3 remote protocol is really different.Just curious if this could ever work with the PS3 as well. There are some classics I wouldn't mind playing.
I'm using it in 5.05, you need to run a Remote Play Enabler payload.To be clear, it's not possible to play without updating your PS4 - right?
If you're above 5.05 and below current, you might struggle, idk
You can just download the ready made app from the link at the bottom of the first post. If you still want to compile it yourself, you need Devkit Pro etc, there are setup guides if you Google, but this isn't needed if you just want to run the app as-is.Is there a tut for making this? I've read through the thread and still confused as to how build the actual app. I have hippie Dave's nsp but lost as where to go from there. Any help is appreciated ty.
You can just download the ready made app from the link at the bottom of the first post. If you still want to compile it yourself, you need Devkit Pro etc, there are setup guides if you Google, but this isn't needed if you just want to run the app as-is.
From the github release page you just need the chiaki.nro file. You also need to make the config file as described & discussed in this thread. The nsp forwarder expects to find /switch/chiaki/chiaki.nroI'm using sxos and when I launch the nro file from homebrew menu it crashes. When I launch using the nsp you made it says there was an error. I'm whatever I'm doing is super easy and I an idiot but I could still use more help. lol
to be honest the 1080p is scaled down to 720p on nintendo switch screen.chiaki works well on the switch at 1080p and 60fps, (Ps4 Pro) on cable and 5g wifi but with sys-clk 1785mhz CPU, 1600mhz RAM, 921mhz GPU, no lag and no perfect blurred image! thanks H0neyBadger for the beautiful workView attachment 209739
Oh ok, I had the file folder structure wrong.. trying again now. TyFrom the github release page you just need the chiaki.nro file. You also need to make the config file as described & discussed in this thread. The nsp forwarder expects to find /switch/chiaki/chiaki.nro
I haven't used it on SX OS, but for me on atmosphere it crashed when I had the SaltyNX sysmodule loaded. Check if you have that or any other extra sysmodules running and try without, and see if anyone else can tell you if it should work on SX OS.