From www.teamcyclops.com:
03/30/2007
The news are good today. First of all, we received two new Wii consoles for testing, one from Japan and one from Hong Kong. Both have the new drive revision that was spotted in Taiwan last week. Guess what, while the drive PCB is different, CycloWiz has been tested and is 100% compatible with the new boards ! Not only is it working as usual, but it is possible to install it using quick-solder method, as the alignement of the points didn't change. While CycloWiz works fine, this is not the case for some other mods for which a wire needs to be soldered directly to a chip's leg because they use an extra solder point that has now been removed.
We also added upgrade 3.0B to the download section. It's similar as 3.0 except that it's now compatible with D2B chipset. Users that already upgraded to 3.0 do not need to upgrade.
Make sure to read the Upgrade 3.0B README file before flashing your chip!
03/30/2007
The news are good today. First of all, we received two new Wii consoles for testing, one from Japan and one from Hong Kong. Both have the new drive revision that was spotted in Taiwan last week. Guess what, while the drive PCB is different, CycloWiz has been tested and is 100% compatible with the new boards ! Not only is it working as usual, but it is possible to install it using quick-solder method, as the alignement of the points didn't change. While CycloWiz works fine, this is not the case for some other mods for which a wire needs to be soldered directly to a chip's leg because they use an extra solder point that has now been removed.
We also added upgrade 3.0B to the download section. It's similar as 3.0 except that it's now compatible with D2B chipset. Users that already upgraded to 3.0 do not need to upgrade.
Make sure to read the Upgrade 3.0B README file before flashing your chip!
