It wouldn't hurt -- if just to see if we got the same MD5 sum.knobydobs said:Should i publicly post the link?
knobydobs said:sorry confirmed not working but heres the link anyway
http://www.freefilehosting.net/dsttiupdate
you link is missing some of the data
Snailfaces has all the correct data
http://www.mediafire.com/?tjbmsgq7o020nbl
thats his link
QUOTE(Schizoanalysis @ May 15 2011, 07:40 AM) If Pong wants to PM me a link to a file I can try that.
I am not so concerned about bricking a DSTTi, I have several here.
Slightly confusedThe Pi said:It's uses the same hardware as an Acekard IIRC (The were paid so it's not a clone just a fake R4)
So trying to make an Acekard update would have more success but Acekard are making one just now so it's not needed. Unless you want wood on a Acekard in which case I'll happily test on my old one (I have 2 anyway)
knobydobs said:Slightly confusedThe Pi said:It's uses the same hardware as an Acekard IIRC (The were paid so it's not a clone just a fake R4)
So trying to make an Acekard update would have more success but Acekard are making one just now so it's not needed. Unless you want wood on a Acekard in which case I'll happily test on my old one (I have 2 anyway)
Are you talking about Acekard, r4 and DSTTi or just Acekard and r4?
Schizoanalysis said:Just tried.
Boots up and fails to update.
It doesn't pass the card check.
BTW, I am using Retrogamefan's firmware.
Doesn;t break the card, but can't update.
Swiizard said:so the dstt firmaware, menus etc is replaced with r4gold?Schizoanalysis said:Just tried.
Boots up and fails to update.
It doesn't pass the card check.
BTW, I am using Retrogamefan's firmware.
Doesn;t break the card, but can't update.
Maybe I am just stupid, but didn't the 1.4 update needed to run on the official kernel (1.17)?
IIRC 1.15 was needed
it did but that was the Firmware check in the TTDS update file
as that was its PASS check
maybe worth a try on firmware 1.15
QUOTE(knobydobs @ May 15 2011, 12:52 PM)
OKPong20302000 said:Swiizard said:so the dstt firmaware, menus etc is replaced with r4gold?Schizoanalysis said:Just tried.
Boots up and fails to update.
It doesn't pass the card check.
BTW, I am using Retrogamefan's firmware.
Doesn;t break the card, but can't update.
Maybe I am just stupid, but didn't the 1.4 update needed to run on the official kernel (1.17)?
IIRC 1.15 was needed
it did but that was the Firmware check in the TTDS update file
as that was its PASS check
maybe worth a try on firmware 1.15
QUOTE(knobydobs @ May 15 2011, 12:52 PM)
yes you would effectively have a R4iGold labled as a DSTT that loads wood
could someone take snailfaces version and add
Sorry I didn't make myself clear.knobydobs said:Slightly confusedThe Pi said:It's uses the same hardware as an Acekard IIRC (The were paid so it's not a clone just a fake R4)
So trying to make an Acekard update would have more success but Acekard are making one just now so it's not needed. Unless you want wood on a Acekard in which case I'll happily test on my old one (I have 2 anyway)
Are you talking about Acekard, r4 and DSTTi or just Acekard and r4?
bitonio6 said:You want a DSTTi 1.4.2 compatible
or you want to transform DSTTi in R4i GOLD?
i say, wait for a new firmware upgrade from nintendo for 3DS...
transforming DSTTi to R4i GOLD will make it 1.4.2 compatible
QUOTE(boudincaca @ May 15 2011, 01:17 PM) I'm following this thread not because of the DSTTi but because I have a 1.3 R4iGold (but with 1.4 pcb hardware).
But every update I tried just say "no need to update", so if one of those .nds can bypass this check, it might be worth a try.
Here it isknobydobs said:OKPong20302000 said:Swiizard said:so the dstt firmaware, menus etc is replaced with r4gold?Schizoanalysis said:Just tried.
Boots up and fails to update.
It doesn't pass the card check.
BTW, I am using Retrogamefan's firmware.
Doesn;t break the card, but can't update.
Maybe I am just stupid, but didn't the 1.4 update needed to run on the official kernel (1.17)?
IIRC 1.15 was needed
it did but that was the Firmware check in the TTDS update file
as that was its PASS check
maybe worth a try on firmware 1.15
QUOTE(knobydobs @ May 15 2011, 12:52 PM)
yes you would effectively have a R4iGold labled as a DSTT that loads wood
could someone take snailfaces version and add
Pong20302000 said:does that version work on 1.4.1?