Prerequisites:
Board Wemos/Lolin S2 Mini....
For ESP32 S2 Mini:
USB CDC On Boot - Disabled
USB Firmware MSC on Boot - Disabled
USB DFU on Boot - Disabled
Partition Scheme - Default 4MB with Spiffs (1.2MB App/1.5MB Spiffs)
Board Looks like this:
If you have already flashed your board with ESP32_Server_900u autohen, you can log into the web interface and flash via the firmware update page.
This mod contains more advanced features:
Wed Admin Info - Added:
MAC Address
Cycle Count (for debugging)
Flash chip Id
Min free ram since boot
Build date
Config Editor:
Change the default autobooting payload and payload name + fixed usb wait time.
Storage format:
Formats spiffs partition and reinstalls goldhen.
Deep sleep:
Puts the chip into deep sleep mode as soon as goldhen is successfully loaded.
PS4 Webpage:
Once goldhen is loaded - fireworks are displayed!
Motherboard:
Motherboard LED is lit when active.
Emergency Trigger: (Anti brick mode) - Pin 16 on Motherboard to ground. Formats spiffs and reinstalls goldhen. Once triggered motherboard led will go out, do not unplug until the led turns back on. When the led comes back on formatting is complete and goldhen will be automatically reinstalled. (AP point is called PS4-Hack, web admin address 192.168.0.31). This is useful if you don't have a computer or get locked out of the web interface due to putting in a wrong password etc.
External led for case display - wired to pin 17 if required.
Source code not available, I'm only releasing the firmware binary for now so you can test it out, I might put the code on github later. Default Access Point address for web admin is 192.168.0.31. If you have already installed ESP32_Server_900u, your settings will be cached, you can use the format tab in the web interface to wipe these settings/cached files if you want to start clean.
Enjoy!
Board Wemos/Lolin S2 Mini....
For ESP32 S2 Mini:
USB CDC On Boot - Disabled
USB Firmware MSC on Boot - Disabled
USB DFU on Boot - Disabled
Partition Scheme - Default 4MB with Spiffs (1.2MB App/1.5MB Spiffs)
Board Looks like this:
If you have already flashed your board with ESP32_Server_900u autohen, you can log into the web interface and flash via the firmware update page.
This mod contains more advanced features:
Wed Admin Info - Added:
MAC Address
Cycle Count (for debugging)
Flash chip Id
Min free ram since boot
Build date
Config Editor:
Change the default autobooting payload and payload name + fixed usb wait time.
Storage format:
Formats spiffs partition and reinstalls goldhen.
Deep sleep:
Puts the chip into deep sleep mode as soon as goldhen is successfully loaded.
PS4 Webpage:
Once goldhen is loaded - fireworks are displayed!
Motherboard:
Motherboard LED is lit when active.
Emergency Trigger: (Anti brick mode) - Pin 16 on Motherboard to ground. Formats spiffs and reinstalls goldhen. Once triggered motherboard led will go out, do not unplug until the led turns back on. When the led comes back on formatting is complete and goldhen will be automatically reinstalled. (AP point is called PS4-Hack, web admin address 192.168.0.31). This is useful if you don't have a computer or get locked out of the web interface due to putting in a wrong password etc.
External led for case display - wired to pin 17 if required.
Source code not available, I'm only releasing the firmware binary for now so you can test it out, I might put the code on github later. Default Access Point address for web admin is 192.168.0.31. If you have already installed ESP32_Server_900u, your settings will be cached, you can use the format tab in the web interface to wipe these settings/cached files if you want to start clean.
Enjoy!
Attachments
Last edited by mrdude,