That's exactly what I used. Looks great! I didn't solder mine. Did you?
Yeah! You don't have to, but it does look brighter if you solder for sure.
That's exactly what I used. Looks great! I didn't solder mine. Did you?
Hi there, I have the same condition as you've had. I get just a white screen. I was thinking its my adapter as well. I've proved the screen works and the old screen works on the motherboard. Can you please link me the adapter you used? This is the one I'm using. Thanks!I have a small update on my mod! Strangely my replacement 32 pin adapter also had the same issue, so I borrowed a 40 pin gba from a friend and bought a 40 pin adapter, and it turns out that the screens work perfectly fine! With that, I assumed that the issue with my 32 pin mod is either the board or the ribbon cable, but as the original unlit screen works perfectly fine, I assumed it had to be the adapter. I bought a couple of 32 pin adapters via aliexpress ("Gamers Zone") and they work perfectly!
Tl;Dr - the reason why the screen originally didn't work was because both ribbon adapters were faulty, just as Testo90 said.
Hi there, I have the same condition as you've had. I get just a white screen. I was thinking its my adapter as well. I've proved the screen works and the old screen works on the motherboard. Can you please link me the adapter you used? This is the one I'm using. Thanks!
folks, i have a 40 pin gb advance with 032-2 under battery cover. im looking to get the best possible screen in uk with backlight, can anyone advise ? do i need a screen with a white tab on the end connector ? sorry for my ignorance
With the last ribbons posted above the 40+white combo has a decent performance.Look 3 comments UP, 40+WHITE worst combination, you need BROWN tab display and good ribbon cable adapter
From this seller http://s.aliexpress.com/6JR3qUVBapeters, can you advise where you got your 40+white bits from ?
I don't really know lolso i need the b version ?
From a real AGS-101and the best place to get the lcd screens ?