Hacking Hardware How do I check that picofly is installed correctly? (A short circuit?)

[Jefix]

Hey, everybody. I am currently trying to install rp2040-zero on ns lite. I soldered the mosfets to the capacitors and found that DRAIN and SOURCE are shorted. Also both pins of the capacitors (that I soldered to) are on ground.

I am not very knowledgeable in radio electronics. Perhaps there is just a very small resistance there? I don't know. Please help me understand if everything is ok. I don't want to destroy my switch.

 

[Woody211]

Should be seeing 10 to 20 ohms in resistance mode on the CPU capacitors where you have soldered, most meters will beep to indicate short in continuity mode.

 

[Jefix]

Should be seeing 10 to 20 ohms in resistance mode on the CPU capacitors where you have soldered, most meters will beep to indicate short in continuity mode.

You were right. Exactly 20 ohms. Thank you.