yeah but i am asking about the copper foil i see in the pics that there is paste on top of the copper foil between the copper foil and the heat pipe
but do they put paste on top of the die , between the top of the die and the copper foil too? or do they just stick the copper foil to the top of the die with no paste? because it is not shown what is under the copper foil in the pics
and he shows the liquid metal paste directly on top of the die but then does not show any other pics, like if he put the liquid metal paste on top of the die and then put the heat pipe back without using the copper foil of if he put the foil back and put more paste on top of the foil or if he put it hack and put the die on top of the foil with no paste
also what is in that shit anyways ,does it contain mercury? is it toxic?
actually it looks like there are 3 layers of paste
one between the top of the die and the copper foil/RF shield
another layer of paste between the top of the copper foil/RF shield and the heat pipe
and yet another layer of paste between the top of the heat pipe and the outer RF shield
so did he just use the one layer between the top of the die and theat pipe and remove the copper foil?
de he replace 3 layers of thermal paste and just use one layer of liquid metal paste?
also his job looks really risky i would have took the SOC RF shield off and used some thing better for insulation than that spray on shit linus used
something that brushes on and did 3 coats and not just around the die but all over
Last edited by weatMod,