Hardware New 2040plus

[Browario]

Hello Guys!
I want to mod v2 and got this "New2040plus". Can I find somewhere a guide how to solder that? I have read guide that is avaible but it's for rp2040zero

 

[linuxares]

all the solder points are the same for the cable on any motherboard

Use this guide for more help - https://gbatemp.net/download/a-definitive-picofly-install-guide.37968/

Video

 

[Browario]

But, how do I know which are CMD, dat0 etc.?

 

[linuxares]

But, how do I know which are CMD, dat0 etc.?

It's different with the cable. You only need to solder it to some points.

If you're very unsure ask your reseller, it's always best to actually research before buy when it comes to these parts

 

[Browario]

Ok, thank you. Please, don't close the thread yet. I'll ask some more questions if I found some problems

 

[linuxares]

Ok, thank you. Please, don't close the thread yet. I'll ask some more questions if I found some problems

We normally don't close threads so no worries

 

[Browario]

So... I disassembled a console. I had to use v1 ribbon. So it must be v1 console but patched. I have soldered that ribbon which you send me, but what about rest? Where to connect that ribbon on RP? Which point to connect? No need for resistors on this?

Or there is no more connections. Just plug 2040plus and should be OK?

 

[Potato Paste]

So... I disassembled a console. I had to use v1 ribbon. So it must be v1 console but patched. I have soldered that ribbon which you send me, but what about rest? Where to connect that ribbon on RP? Which point to connect? No need for resistors on this?

Or there is no more connections. Just plug 2040plus and should be OK?

if this one is the one where the nand chip connects directly to the chip no other soldering required

 

[linuxares]

If you look on the cable you see it already got some resistors and mosfets on it. No need to do anything else.

 

[Browario]

Ok. I did it. It looks like this

If you know more safe method, let me know...

Thank you for any reply!