I disassembled my 3ds to replace the stick and broke the ribbon cables for shoulder buttons. I assembled everything back after finishing and checked if it would boot up. It did so i put it on the shelf and waited about a month for new ribbon cables i ordered. When they came i assembled everything and now it does not turn on at all. I already replaced the battery and charged it separately from the console. Also I made a scratch on the motherboard but it booted up normally after that so i don't think that's the problem. (It's to the right of mini jack)
New 3DS 2015 won't turn on. No blue light, just orange light when plugged in
- Thread starter ponch
- Start date
- Views 1,315
- Replies 7
Well replacing the shoulder button's ribbon cable shouldn't be that difficult to do. Is the ribbon cable a knock off? Can you confirm that the button works now?
You should charge the battery when it's plugged in the 3ds itself. Also the 3ds doesn't turn on (with just the charging cable) if the battery is not plugged in.
You should charge the battery when it's plugged in the 3ds itself. Also the 3ds doesn't turn on (with just the charging cable) if the battery is not plugged in.
They are knock off. I can't confirm that they are working because my console is not working, but i have three pairs and at least one of them should be in working order, i tried all of them. Also it should boot up even without them so it does not really matter.
I tried charging battery in the 3ds but i guess it's not charging because i charged it for 24 hours and still had yellow light. Also all of my attempts of booting up the console were made when battery was in the console.
- Joined
- Sep 13, 2022
- Messages
- 7,448
- Trophies
- 3
- Location
- The Wired
- Website
- m4x1mumrez87.neocities.org
- XP
- 21,114
- Country
What do you mean by 'knock off'? Is it the console you're referring to because no bootleg 3DS consoles ever existed, apart from refurbished modded ones sold on Chinese marketplaces like AliExpress with new shells installed.They are knock off. I can't confirm that they are working because my console is not working, but i have three pairs and at least one of them should be in working order, i tried all of them. Also it should boot up even without them so it does not really matter.
I tried charging battery in the 3ds but i guess it's not charging because i charged it for 24 hours and still had yellow light. Also all of my attempts of booting up the console were made when battery was in the console.
I was referring to my new ribbon cables. I hope i understood the question of a person i was replying to correctly. I got them from aliexpress so i guess they are knock off.
- Joined
- Sep 13, 2022
- Messages
- 7,448
- Trophies
- 3
- Location
- The Wired
- Website
- m4x1mumrez87.neocities.org
- XP
- 21,114
- Country
Have you checked for any broken traces or dents in the cable?
Post automatically merged:
Use an x-acto knife or small blade to cut away the solder mask next to the broken traces, then solder small copper wire to make a new trace where it was broken.
I checked all of the cables pretty thoroughly and they all look fine to me, i did not even touch many cables so i can't for the life of me figure out what is wrong.
Thank you for your advice about broken trace. I will try to do just that
Similar threads
- Locked
- No one is chatting at the moment.
-
-
@
K3Nv2:
Yeah mobile versions better people don't think about how apps are just shrunken down websites -
-
-
-
@
Sicklyboy:
Agreed. Crazy how both seeking a job at Amazon, and subsequently quitting Amazon, are both some of the best decisions I've ever made -
-
-
-
-
@
Sicklyboy:
Then I find myself arguing with someone on reddit about how blatantly wrong their understanding of the USB Power Delivery specification is.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
