For some reason, the forwarder just stopped working. I have no idea why, I'm doing the same exact process for every inject, but the injects just stopped working. I've rebooted the console, the program, the PC, but have had absolutely no progress. Can anyone help?
Another update and another mission. Well for the first time after updating my forwarders still work lol any clue tho how to add custom icon? I got Tinfoil to change but not the rest
Hello, I am on atmosphere 1.2.6 firmware 13.2.1 and I used the latest version of his scripts which allow to batch process many forwarders at once but for some reason I cannot always make the picture to work on my switch.
Basically, they all are JPG 256x256, some are odd like 256x255, I do not know if it matters.
I did follow all the instruction which was to get mogrify.exe. In any case my forwarders are working. HB application open and they have their icon I choose but my retroapp forwarders do not have their icons on the switch. I tried many, many times yesterday and I cannot make it work. I do not know what the issue is. Note that they work just that are installed without icons.
I want to process all my library from my PC to my switch meaning all ROMS, GB, GBC, GBA, NES, SNES, N64, NDS, N3DS and so on. I already scripted my GB and GBC lines for the batch process. I hope I didn’t waste my time.
Hello I'm also on the same atmosphere 1.2.6 firmware 13.2.1 and I'm trying to make a ps1 collection on home screen I have 7 forwarders as of now and did them back to back tried to pick up from where I left off and can't seem to get anymore to work, all icons are showing but when I click a on them acts like it's going to load then gives an error and to return to the home screen my question is what are you doing to get them to work for every nsp you make. I can help with Icons if you need help just post a list of all icon not working and I'll get them working for you
hello everyone, i have been using Menu_v0.12b_AIO and i seen to be either not using the gui right which i know i am every icon is 256x256 and in .jpeg and the logo is 160x40 and in .png using this for core
/retroarch/cores/pcsx_rearmed_libretro_libnx.nro and i always click on the disable image conversion or the gui is broken in some way cause iam experiencing an issue where i can only make a few nsp files or 1,2 or none at all and after i try like a dozen times i have to delete the entire Menu_v0.12b_AIO which is in a folder not sure what is causing this but i pulled up task manager and realized that the gui is a 32bit version not sure if there is a 64bit version out there and not sure that this is the problem but i know from other programs that you are supposed use the correct 32bit programs for 32bit operating systems and 64bit programs operating systems cause some will operate but not to full capacity or not at all could someone please help with my issue please and thank you in advance
Because the Nro2Nsp is not working with 12+, so I tried to make a tool to do it by myself, based on hacBrewPack, for Windows
Step by step
1) Download
2) Extract to a folder on your Desktop, eg: NSP-Forwarder. Then copy your prod.keys file into it.
3) Press [Window]+R, then type cmd, press Enter to open Command Prompt
4) Type cd, [Space], then drag the NSP-Forwarder folder into the Command Prompt windows, press Enter
5) Type build APP_NAME ICON_PATH NRO_PATH then press Enter
- APP_NAME = Display name of the your app
- ICON_PATH = Path of icon file
- NRO_PATH = Path to the nro file
- You can drag the icon file into the Command Prompt instead of typing the path
Example build DBI C:\Users\ZZZ\Desktop\icon.jpg /switch/DBI.nro
It will build the NSP file and places it into the NSP folder
EDIT: If you have problem with DLL file, try to install MSYS2 -
EDIT2: I've attached some NSPs I built for myself
I used your retro arch nsp since I could not figure out how to make or install my own. I keep getting "?" for icons and the generic this was closed because an error every time I try.
My RetroArch fails to close properly when using (installing) your nsp file. Is that typical behavior now since typical things (games) that would be on one's main screen do not have any internal quit functions?
small side note, this forum allows you to post 1,000 url links in your messages but I can not quote your message in my own without removing all the links?
you need to decompile the nsp and extract the control.nacp file, then you used hxh a hex editor and edit the nacp file in offset 0x3035 the possible values are the following 00 = video recording not permitted, 01 = manual recording, and 02 = force recording. then you rebuild nsp and that's it.
You think you can explain in more detail on how to do this using jakcrons nstool that @impeeza posted? I am having a hell of a time trying to figure this out. I am not program savvy at all, I don't really understand what the 'Usage' instructions are saying to me. But I think If you can describe to me how to 'decompile the nsp and extract the control.nacp file and rebuild the NSP,' I can figure out the rest on my own.
Thanks in advance!
I came to ask you this without realizing you replied to me already. I actually found your earlier comment saying this and you linked SAK,
so I've been doing that but having issues with is. No NSP I make with SAK is working, any NSP I build Isn't recognized by the switch and it endless loads no image and can't be opened. Usually that's a sig patch thing but I also know Nro2Nsp doesn't work because It doesn't support firmware 12+. Does Switch Army Knife not support FW 15.0.0 perhaps? Maybe I'm missing a sig patch?
Post automatically merged:
@impeeza
I figured it out just now. It was my image file, it was too big. Adjusted it and it works just fine. I didn't think that would cause it to not work. So just in case anyone sees this and has my same issue.
However I have a new problem, the recording does work but it's with no sound. Honestly not too bad, but if you or anyone else know how to fix the sound then that would be great
I came to ask you this without realizing you replied to me already. I actually found your earlier comment saying this and you linked SAK,
so I've been doing that but having issues with is. No NSP I make with SAK is working, any NSP I build Isn't recognized by the switch and it endless loads no image and can't be opened. Usually that's a sig patch thing but I also know Nro2Nsp doesn't work because It doesn't support firmware 12+. Does Switch Army Knife not support FW 15.0.0 perhaps? Maybe I'm missing a sig patch?
Post automatically merged:
@impeeza
I figured it out just now. It was my image file, it was too big. Adjusted it and it works just fine. I didn't think that would cause it to not work. So just in case anyone sees this and has my same issue.
However I have a new problem, the recording does work but it's with no sound. Honestly not too bad, but if you or anyone else know how to fix the sound then that would be great
My problem wasn't firmware related or sig patch related like I thought. The image file I uploaded for the logo was too big. Apparently SAK is very picky on the size. Too small and the image will just be a question mark but the NSP will still run, too big and the whole NSP will not run at all. Make sure your image file is 256x256 JPG. I use this website to convert my images- oh I can't post links yet but its "convert-my-image dot com." I'm sure there are regular programs that convert images but this site was convenient for me
Edit: Oh and the sound issue was specific to the NRO I was forwarding, it just happened to be the first one I tried. All the other ones I made recorded with sound just fine
I don't understand any of this but i really want to. I'm not a person who can learn like this (reading instructions) call me what you want it is what it is but am willing to pay for someone to show me a video how to do all of this or to make one i dont care i fully willing to do it. i cant figure out what im doing wrong. i cant get the program working. does anyone have a video they can show me. (English nit my first language)
I don't understand any of this but i really want to. I'm not a person who can learn like this (reading instructions) call me what you want it is what it is but am willing to pay for someone to show me a video how to do all of this or to make one i dont care i fully willing to do it. i cant figure out what im doing wrong. i cant get the program working. does anyone have a video they can show me. (English nit my first language)
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
With the vast success of Super Mario Maker and its Switch sequel Super Mario Maker 2, Nintendo fans have long been calling for "Maker" titles for other iconic genres...
Retro handheld manufacturer Anbernic has revealed its first clamshell device: the Anbernic RG35XXSP. As the suffix indicates, this handheld's design is inspired by...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
Nintendo has officially announced that a successor to the beloved Switch console is on the horizon. As we eagerly anticipate what innovations this new device will...
While rumors had been floating about rampantly as to the future plans of Nintendo, the President of the company, Shuntaro Furukawa, made a brief statement confirming...
As each year passes, retro games become harder and harder to play, as the physical media begins to fall apart and becomes more difficult and expensive to obtain. The...
After several months of work, the Harbour Masters 64 team have released their first public build of 2Ship2Harkinian, a feature-rich Majora's Mask PC port. This comes...
Ubisoft has today officially revealed the next installment in the Assassin's Creed franchise: Assassin's Creed Shadows. This entry is set in late Sengoku-era Japan...
After a little more than three years of exclusivity with the Epic Games Store, Square Enix has decided to bring their beloved Kingdom Hearts franchise to Steam. The...
After rumour got out about an upcoming NES Edition release for the famed Nintendo World Championships, Nintendo has officially unveiled the new game, titled "Nintendo...
DOOM is well-known for being ported to basically every device with some kind of input, and that list now includes the old retro game console in Persona 5 Royal...
Sony is once more attempting to reintroduce players to their older library of games by re-releasing classic PlayStation 2 titles onto the PlayStation Store. During...
The number of layoffs and cuts in the videogame industry sadly continue to grow, with the latest huge layoffs coming from Microsoft, due to what MIcrosoft calls a...
Ok ima just paste my message to someone else:
When i launch a game my wiimote unsyncs and doesnt want to connect again.People told me to ask you for help, i tried both Motion Plus inside and without motion plus but it doesnt work. Any ideas?
@Zynthrodak, Do you know if the batteries are dying? If the controller doesn't sync with the console, press the Sync button on both the controller and the console.
hi! so one time i forgot to load usb loader gx into sd card mode and then everytime i launch it, and even when i launch into sd card mode, it doesnt show anything on my sd card and just shows whats on my hard drive