I have a question about using bootmii as boot2 with Postloader and neek2o
Previously, my working setup with bootmii as ios worked like this.......
Postloader launches via Priiloader, I'll launch the neek2o channel on the real nand and then I will switch back by launching the channel on the emulated nand. I could also launch neek2o using the Postloader neek2o menu options
I recently installed bootmii as boot2 and now........
Postloader launches via Priiloader, none of the neek2o options are available in Postloader. I can still launch neek2o from the installed channel but it appears that I no longer have the ability to designate a "neek2o" nand from within Postlaoder application. I see no mention of neek2o in the Postloader menu options, only neek.
Can someone explain to me why having bootmii as boot2 changes the way Postloader works with neek2o?
I know this question covers several apps, not just Postloader, sorry if I'm posting in the wrong thread.
Ok, so I believe I cleaned up my mess.
I cleared up the bootmii problem by renaming the bootmii folder on the sd card.
After that, it was time to focus on why Postloader nand switching stopped working. In my previous post, I failed to mention that I recently updated to PL 4.7.95.
This version of PL didn’t show the “switch neek2o nand” option in the main menu. Instead it had the “change uneek nand” option. When I launched the neek2o channel on my real nand, I booted into my “pl_us” nand it what appeared to be in uneek mode, not neek2o mode.
From there I tried switching to my “pln2o” nand like I was used to doing. I clicked on the “change uneek nand” option and this is when things quit working right. I could no longer switch between nands. I eventually got back to my real nand and confirmed launching a vc game in neek2o mode no longer worked. I noticed that my emunand files were scattered between the “usb:\\nands” folder and the root of the usb drive.
So, in an attempt to fix, I organized my emunand files back to the proper directory structure, replaced my “usb:\\sneek” folder with new copy and deleted all the PL and neek related config and cache files. From there I launched PL again and but had the same issue with the nand switching, the neek2o option wasn’t present.
From there I wiped all the PL settings and downgraded to the previous version of PL, the last version that stfour put out. From there I was able to access my nands in neek2o mode and I was able to switch between them without any issues.
Although my problem went away once I downgraded PL, I’m not entirely convinced that there is an issue with the new version of PL. It could have just been a coincidence that things started working again, I don’t know. I’m just glad it’s working again. Has anyone else noticed neek2o issues since upgrading to PL 4.7.95 ?