This quote is not from first post but the guide and there's one the too much.
Yes I am fun at parties.
that was actually biscuits mistake but im glad you picked up on it
I will talk to biscuit so these problems don't persist from here on out
This quote is not from first post but the guide and there's one the too much.
Yes I am fun at parties.
Thank you for this guide.
First time hacking my switch here and I am stuck at the Auto RCM part.
3. Boot your Switch with ReiNX as you have done in the past. KEEP THE JIG INSIDE THE JOYCON RAIL.
4. Go into System Settings -> System -> System Update. Begin the process.
5. While your switch is updating, hold down Volume Up the whole time. Make sure the jig is still inside the rail.
However I had to update my switch in order to have it recognize my micro sd card as exfat. So now there is nothing to update in step 4.
then you can skip it, it's fine - go to the bottom of the guide for instructions on how to use the CFW
if you have not enabled autorcm at all then yes, it will enable it - (if you have enabled it before it will disable it); we're working on a way to detect if it's enabled though and show itAt the bottom of the guide where it says ReiNX Tool Kit, would I just go about Toggle Auto RCM and hit Yes meaning it will enable Auto RCM?
yesAt the bottom of the guide where it says ReiNX Tool Kit, would I just go about Toggle Auto RCM and hit Yes meaning it will enable Auto RCM?
if you have not enabled autorcm at all then yes, it will enable it - (if you have enabled it before it will disable it); we're working on a way to detect if it's enabled though and show it
yes
Edit: 'd by killim
Followed the guide and have my Switch playing backups without issues.
One thing I noticed is that some games asked for an update, how can the switch know that the game have an update if I have it always disconnected from network?
hotspot or going near another updated console without plane mode, they talk together to share latest title update information.
Is your SD card formatted as exFAT?I followed the guide on the website but after injecting the ReiNX payload, I see the anime logo but after that it does nothing and just goes dark. Anyone ran into this issue? I tried it twice, not sure what I'm doing wrong.
Is your SD card formatted as exFAT?
Using an exFAT formatted SD card on a console without exFAT will cause a black screen when injecting the payload. Your options are to get the exFAT update outside of the guide or format your SD card to FAT32.Yes, formated to exFAT. I'm on 4.1 FW (original firmware) and have not put on the exFat update.
Followed the guide and have my Switch playing backups without issues.
One thing I noticed is that some games asked for an update, how can the switch know that the game have an update if I have it always disconnected from network?