This is the serial number for non-vulnerable Switch units: XAJX004+
I would say XAJ7004+, I think there are a few people here with XAJ4004+ that were able to run payloads
This is the serial number for non-vulnerable Switch units: XAJX004+
Are you on the latest firmware? There are also the possibilities that not all DLC are supported or the .NSP you used did not work.So, I'm trying to install the Xenoblade 2 DLC. However, to access the Xenoblade 2 DLC, you need to claim them in a menu in the game. The thing is, even though the game tell me that I've bought the DLC, they don't show up in the menu for me to claim it. Any one knows what the problem is?
Just pray that Nintendo doesn't patch your bootrom in the meantime which is possible now that its in their hands. Read-only means they cannot make any software modifications, but they can certainly make any necessary hardware modifications as long as it doesn't affect the base functionality of the console.Draxzelex since my screen didn’t turn on, ie no visible sign that it booted up , not even the battery symbol I can’t even confirm it was starting up , at the suggestion of a article I left it charging for more than two hours and tried to start it with charging cable Still attached. When that didn’t work I plugged back in the dongle tried to start with attached holding down the volume button and the power button, finally I tried using the gig then the dongle to start it. At no point did I see a single pixel light up. Which is why in desperation I mailed it to Nintendo hoping it was a hardware defect and they would repair it. To be honest I am hoping it was defective because in the month I had owned the switch I had made several attempts to dock it and play on my tv (prior to buying the X Pro) and never successfully connected to my tv, it played in handheld mode , but it didn’t even seem to charge while docked. I feel like in the last month I had spent more time watching YouTube videos about home brew and the Executor Pro than I spent playing my switch. Oh well first world problems SMH
Hello
I don't udnerstand anything about all this stuff.
i want to buy a N.Switch to use it with SX Pro in order to play iso game/ I wanted to know :
- If i buy a new switch that is "patched" (new switch that is against hacking) can i install sx pro to play iso game ?
- If no' what do i have to check exactly when i buy the switch ? i read the post about the serial etc but i don't understand a word of what i have to check
Thank you
YesHow do I remove the devmenu?
Can I just delete the folder and Pokémon quest will start normally?
I haven't seen one yet that was able to run a payload with XAJ4004+. I know of one that wasn't. Regardless, this information is sparse and is still being actively collected. At this point, we do know that anything below XAJX004... are not patched. The proper serial number for patched units is not yet finalized and is based on preliminary findings.I would say XAJ7004+, I think there are a few people here with XAJ4004+ that were able to run payloads
yes there's a home brew app for dumping carts currently. I have used it personally and works perfectly. ( It's Good idea to zero out your certificates with an xci loader when you do)1) Is what I described above -- primarily dumping my Switch games to SD -- currently possible?
As of now you will need SX OS software licence to actually play the backups as this is the only functional loader available and its easy to do just have to launch photo album tab once you've booted into their custom fw to play the backups2) If the above is possible, how troublesome is actually launching dumped Switch games and Homebrew apps. Would I be able to launch things directly from the home menu immediately upon powering on the device, as I can do with the games that I dumped from disc on my Wii U, or will I have to launch something akin to Haxchii as I must do on the Wii U for homebrew apps like Retroarch?
This ranges from banned consoles/games and even accounts reports are all over the place.3) What are the risks of bannination from Nintendo?
Just hold volume up while injecting the payload. Yes you have to connect the pinsi forgot to enable Auto RCM before activating sx os, how can i go back to the first sx os menu, can i get back to that menu without connecting pins again? how?
and another question (Sorry):
is there any tutorial about how to launch eshop games on sx os 1.3?
do i need to go online for this?
As of now you will need SX OS software licence to actually play the backups as this is the only functional loader available and its easy to do just have to launch photo album tab once you've booted into their custom fw to play the backups.
thanks.Just hold volume up while injecting the payload. Yes you have to connect the pins
I was unaware that SX OS was a commercial product. I am not necessarily averse to ordering it but looking at the steps needed to make it work I would prefer something a little simpler so I am tempted to wait to see if anything else comes along.
As I noted: I am currently on firmware 3.0.0. I would like, in the near future, to play Xenoblade Chronicles 2 which I believe requires 4.1.0. I assume that I would still be able to use the SX OX firmware even if I upgrade the console to 4.1.0. Also, if I do go the SX OS route, is the SX Pro worthwhile, or should I just buy the software license and leave it at that?
thanks.
anoher dumb question: do i have to remove sd card from console, connect it to pc and copy games to it? is there any other way?
cuz i just removed sd card and my switch said i have to turn off my console because i've removed sd card
basically do i need to connect my console to pc and inject payload everytime i want to remove sd card?
Considering you want something super easy, you would probably want to go the SX pro route. The big difference between the two is the SX Pro provides you the jig to get into RCM mode and a convenient means to send the payloader to the switch without having to do it through a PC. The software license alone will mean you need to make you own jig (I dont recommend you making your own unless your very meticulous and careful) or buy a 3d printed one and also use your PC with usbc to usba cord to send the payload through Tegrarcmsmash.It might sound overwhelming and difficult at first but no worries theres tons of forums and information on this site to help you along, so your in the right place to start.Don't sweat it either way is easy peasy. Its more of a convenience with Pro vs non Pro.
Yes.Theres an alternative. An app called FTPD but depending on the file size aint nobody got time for that.thanks.
anoher dumb question: do i have to remove sd card from console, connect it to pc and copy games to it? is there any other way?
cuz i just removed sd card and my switch said i have to turn off my console because i've removed sd card
basically do i need to connect my console to pc and inject payload everytime i want to remove sd card?
Here is a list of what all of the pins do: https://reswitched.tech/hardware/joycon Of note, pin 9 won't lead to damage, but damaging pin 8 will render the Joy-Cons unable to connect with the consoleso what happens when I accidentally connected pins 8,9, and 10 in foil method to access RCM? I'm scared that I might break something
Here is a list of what all of the pins do: https://reswitched.tech/hardware/joycon Of note, pin 9 won't lead to damage, but damaging pin 8 will render the Joy-Cons unable to connect with the console
I don't believe the damage will be permanent if no tin foil remains when you do eventually remove it. But this is the problem with tin foil because it can break apart very easily and be hard to recover. In case you are not aware, here is a video that does it safely as possible:dang, so I really have to be careful. So it will automatically break when I accidentally connected the 3 pins using foil?
See below for 2 tutorials on how to get the exFAT update offline:I bought my switch and SX OS. Switch was on 4.0.1 and after Nand backing up I did the SX OS activation thing and put auto RCM. The problem is that I just noticed that my sd card is Fat32 and bigger games wont get on my sd card cuz its not exfat. But when I formatted it as Exfat my switch hadnt recognized it (asked for update).
What should I do?
Can i safely update eventho ive already put SX OS on my switch? Any way to still turn exfat without updating?
Thx in advance!
First of all thx. I want to play Octopath Traveler, Im getting 'game card could not be read'' is that because im still on lower firmware, or does this also have to do with the sdcard as fat32 ?See below for 2 tutorials on how to get the exFAT update offline:
https://gbatemp.net/threads/how-to-install-the-exfat-driver-without-updating-2-x.505176/
https://gbatemp.net/threads/how-to-...tch-console-on-any-ofw-without-update.505182/